Installation Gallery

PROFESSIONAL INSTALLATIONS AVAILABLE

Looking for a seamless installation of your LED or HID kit? HID Vision Canada has you covered. Our expert technicians are proficient in installing kits for all car and truck makes and models, with a specialized focus on Dodge RAM LED and HID installations. Our installation service is priced at $60 per hour. To ensure availability, appointments should be scheduled at least 1-2 days in advance. For bookings, please reach out to us at 368-996-8076 AB or 604-791-9027 BC or drop us an email at sales@hidvisioncanada.ca. Let us make your upgrade hassle-free and professionally done.

WILL YOU INSTALL AN LED OR HID KIT BOUGHT SOMEWHERE ELSE?

Yes, we can do that for you.

WILL YOU TROUBLESHOT MY INSTALLATION OF LED OR HID LIGHTS?

Yes, we can do that too.

 

THE GALLERY BELOW SHOWS INSTALLATIONS FROM OLDEST TO NEWEST

 

2006 LEXUS IS350

LOW BEAM: HID D4S
HIGH BEAM(DRL): LED 9005 LED-18 5050
FOGS: HID 9006

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-infinity-qx4-1.jpg

 

2001 INFINITY QX4

LOW BEAM: HID D2R
HIGH BEAM(DRL): LED 9005 LED-18 5050s
FOGS: HID kit H3

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2006 LEXUS IS350

LED STRIP LIGHT - 60cm, White

 

AUDI A4

LOW BEAM: HID kit H7 w/CANBUS
HIGH BEAM: OEM halogen (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

VW WESTFALIA

LOW BEAM: HID kit 9004 canbus pro
HIGH BEAM: OEM halogen
Driving Lights: DL-D40A
DRL: 30cm LED strip

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2001 DODGE RAM 3500

LOW BEAM: HID kit 9007 (DRL)
HIGH-BEAM: HID kit 9004
FOGS: HID kit 880 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

TOYOTA TACOMA

HEADLIGHT: HID kit H4 Bi-xenon
Relay harness was required to operate daytime running lights

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

1997 HONDA CIVIC EX

HEADLIGHT: HID kit H4 H/L, High beam halogen bulb operates daytime running lights

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

HONDA ODYSSEY

LOW BEAM: HID kit 9006 canbus pro
HIGH BEAM: OEM halogen (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 LEXUS IS350

LOW BEAM: HID D4S
HIGH BEAM (DRL): 9005 OEM halogen
FOGS: HID kit 9006

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

SUBARU IMPREZA

LOW BEAM: HID kit H7 (DRL), Relay harness was required to operate daytime running lights

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

NISSAN VERSA

HEADLIGHT: HID kit H13 Bi-xenon (DRL) canbus pro, Relay harness was required to operate daytime running lights
FOGS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

HONDA ACCORD

LOW BEAM: HID kit 9006 canbus pro
HIGH BEAM: OEM halogen (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 HYUNDAI SANTAFE

LOW BEAM: HID kit H7 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

CHEVROLET VENTURE

HEADLIGHTS: HID kit 9004 H/L, High beam halogen bulb operates daytime running lights

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

JEEP LIBERTY

HEADLIGHT: HID kit 9007 Bi-xenon canbus pro, Relay harness was required to operate daytime running lights
FOGS: HID kit H10 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

TOYOTA COROLLA

LOW BEAM: HID kit 9006 canbus pro (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

HONDA ACCORD

LOW BEAM: HID kit 9006
HIGH BEAM: OEM halogen (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

DODGE SPRINTER

LOW BEAM: HID kit H7 canbus pro (DRL)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

JEEP CHEROKEE SRT8

LOW BEAM: HID kit 9005 canbus pro
HIGH BEAM: HID kit 9006 canbus pro (DRL), Relay harness was required to operate daytime running lights
FOGS: H10

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-volvo-semi-trailer-3.jpg  

VOLVO SEMI-TRAILER

LOW BEAM: HID kit H11 canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

hid-lights-volvo-semi-trailer-1.jpg  

VOLVO SEMI-TRAILER

LOW BEAM: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

FREIGHTLINER SEMI-TRAILER

LOW BEAM: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

GMC ENVOY

LOW BEAM: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

DODGE RAM

HEADLIGHTS: HID kit 9007 Bi-xenon canbus pro
FOGS: 880

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2013 KIA

LOW BEAM: HID kit H11 canbus pro
HIGH BEAM: HID kit 9005 canbus pro 
FOGS: HID kit H1 canbus pro

Relay harness was required for all 3 kits

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

LAND CRUISER

LOW BEAM: HID kit H4 Bi-xenon, relay harness was required to operate daytime running lights
FOGS: H4 Single bulb 8000K

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 CHEVROLET SILVERADO

LOW BEAM: HID kit H11 (DRL) canbus pro
HIGH BEAM: HID kit 9005  canbus pro
FOGS: HID kit H16  canbus pro

COLOR: 6000K
POWER: 35W 
BULBS: Super Vision HID

 

VW JETTA

LOW BEAM: HID kit H1 canbus pro
Bulb adapter was required to install HID bulbs
PARKING LIGHTS: T10 LED's

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

CHEVROLET SUBURBAN

LOW BEAM: HID kit H11 (DRL) canbus pro w/Relay
HIGH BEAM: HID kit 9005 canbus pro
FOGS: H16

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

MAZDA 5

LOW BEAM: HID kit H7 (DRL) canbus pro, H7 bulb adapter was required to install HID bulbs

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

FORD F150 LARIAT

HEADLIGHTS: HID kit H13 Bi-xenon canbus pro (DRL), Relay harness was required to operate daytime running lights
MARKER LIGHTS: T10 LED's
FOGS: HID kit H16

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2010 HONDA FIT

HEADLIGHTS: HID kit H4 H/L canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 HONDA ACCORD

LOW BEAM: HID kit 9006 (DRL) canbus pro
HIGH-BEAM: OEM halogen

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2011 HYUNDAI ACCENT

HEADLIGHTS: HID kit H4 H/L (DRL) canbus pro
FOGS: HID kit 880 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 HONDA ACCORD

LOW BEAM: HID kit H11 canbus pro
HIGH-BEAM: OEM halogen

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2006 NISSAN ALTIMA

LOW BEAM: HID kit H11 canbus pro
HIGH-BEAM: OEM halogen

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2002 SUBARU WRX

HEADLIGHTS: HID kit 9007 Bi-xenon w/relay harness
FOGS: HID kit H3 w/relay harness

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2001 HONDA CBR 600

HEADLIGHTS: HID kit H7

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2002 ACURA MDX

HEADLIGHTS: HID kit 9006 canbus pro
FOGS: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-dodge-300c.jpg  

2006 CHRYSLER 300C

HEADLIGHTS: OEM HID
FOGS: HID kit H10 (9145) canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2013 CHEVROLET CRUZE

HEADLIGHTS: HID kit H13 bi-xenon
FOGS: halogen

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

1982 CHEVROLET CAMARO

HEADLIGHTS: H4656 with HID kit H4/L canbus
PHOTO: LOW BEAM XENON

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

1982 CHEVROLET CAMARO

HEADLIGHTS: H4656 with HID H4/L canbus
PHOTO: HIGH BEAM XENON & HALOGEN

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2004 TOYOTA ECHO

HEADLIGHTS: HID kit H4/L canbus pro
(low beam xenon high beam halogen)

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 DODGE RAM 3500

HEADLIGHTS: HID kit H13 canbus pro, Relay and resistors were required
FOG LIGHTS: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2002 DODGE RAM 1500

HEADLIGHTS: HID kit 9007/L canbus pro, 
(low beam xenon high beam halogen) with Canbus ballasts

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2009 BMW 323i

HEADLIGHTS: HID kit H7 canbus pro 
FOG LIGHTS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2013 JEEP COMPASS

HEADLIGHTS: HID kit H11 canbus pro, relay was required.

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2004 CADILLAC CTS

HEADLIGHTS: HID D1S
FOG LIGHTS: OEM halogen
PARK LIGHTS: LED T10-8

COLOR: 6000K
POWER: 35W
Required full bumper removal.
 

2009 CHEVROLET TAHOE

HEADLIGHTS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2012 KIA FORTE SX HATCHBACK

HEADLIGHTS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2008 JEEP WRANGLER

HEADLIGHTS: HID kit H13 canbus pro, relay
FOG LIGHTS: HID kit H10 (9145) canbus pro 

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2013 FORD F150

HEADLIGHTS: HID kit H13 bi-xenon with
canbus ballasts and relay harness
FOGS: LED kit 9005 30W 3200lm
SIDE MARKERS: LED T10-8

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-2005-dodge-ram-1500-slt.jpg  

2005 DODGE RAM 1500 SLT

HEADLIGHTS: HID kit 9007 bi-xenon, canbus pro, dual relays, resistors and warning cancellers were needed

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

1999 PLYMOUTH VOYAGER

HEADLIGHTS: HID kit 9007 bi-xenon, canbus pro, and relay harness

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2006 FORD MUSTANG

HEADLIGHTS: HID kit H13 canbus pro, relay was needed

COLOR: 10,000K
POWER: 35W
BULBS: Super Vision HID

 

2007 DODGE RAM 3500

HEADLIGHTS: HID kit H13, we only supplied H13 relay and H13 resistors for this install

COLOR: 6000K
POWER: 35W
BULBS: Competitor's HID kit

NOTE: "Lamp out" warning canceller was required

 

DODGE CARAVAN

HEADLIGHTS: HID kit H13 canbus pro w/relay

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-2004-dodge-ram-3500.jpg  

2004 DODGE RAM 3500

HEADLIGHTS: HID kit H13, we only supplied H13 relay and H13 resistors for this install

COLOR: 6000K
POWER: 35W
BULBS: Competitor's HID kit

hid-lights-2008-toyota-tacoma.jpg  

2008 TOYOTA TACOMA

HEADLIGHTS: HID kit H4 canbus pro w/relay
FOG LIGHTS: HID kit H10 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-1999-mercedes-benz-clk230.jpg  

1999 MB CLK230

LOW BEAM (DRL): HID kit H7 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

Installation Note: No relay was required. Lights get full 12V in DRL mode.
hid-lights-2012-mitsubishi-rvr.jpg  

2012 MITSUBISHI AWC RVR

HEADLIGHTS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

Installation Note: Must use 55W HID, DRL get full 12V but lights flicker with 35W bulbs.

 

DODGE RAM

2x 60cm LED DRL strips

 

2012 VW GOLF

HEADLIGHTS: HID kit H7 canbus pro

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2004 FORD EXPEDITION

HEADLIGHTS: HID bulbs 9006 canbus pro
FOG LIGHTS: HID bulbs H10 canbus pro

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2005 PONTIAC VIBE

HEADLIGHTS: HID kit H4/L w/canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2006 LEXUS IS350

LOW BEAM: D4S
HIGH BEAM(DRL): 9005 PLASMA LED
FOGS: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

HONDA CIVIC

HEADLIGHT: HID kit H4 H/L canbus pro, High beam halogen bulb operates daytime running lights

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2013 FORD F150

HEADLIGHTS: HID kit H13 bi-xenon with
canbus pro and relay harness

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

2010 DODGE RAM

HEADLIGHTS: HID kit H11 canbus pro
FOG LIGHTS: HID kit 9005 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

No relays or resistors were needed.

hid-lights-2014-gmc-slt.jpg  

2014 GMC SLT

HEADLIGHTS: HID kit 9012 canbus pro
FOG LIGHTS: HID kit H16 LED 50W

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

No relays were needed.

hid-lights-2010-gmc-acadia.jpg  

2010 GMC ACADIA SLT

LOW BEAMS: HID kit H11 canbus pro
HIGH BEAM: HID kit H7 canbus pro
FOG LIGHTS: HID kit H16 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-2007-toyota-camry-se.jpg  

2007 TOYOTA CAMRY SE

LOW BEAMS: HID kit H11 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

HONDA ACCORD

LOW BEAM: HID kit 9006 canbus pro
HIGH BEAM: HID kit 9005 canbus pro w/relay

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

hid-lights-2013-toyota-scion-frs.jpg  

2013 TOYOTA SCION FRS

LOW BEAMS: HID kit H11 canbus pro

COLOR: 8000K
POWER: 55W
BULBS: Super Vision HID

 

2014 DODGE RAM 1500

LOW BEAM: HID kit 9012 55W canbus pro
HIGH BEAM: HID kit 9005 55W canbus pro
FOGS: HID kit 880 55W canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

2012 AUDI S4

FOGS: HID kit H11 canbus pro

COLOR: 4300K
POWER: 55W
BULBS: Super Vision HID

 

2015 NISSAN TITAN

LOW BEAM: HID kit 9006 canbus pro
FOGS: HID kit 880 canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

1992 Honda Civic

LOW BEAM: HID kit H1 canbus pro

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

 

2014 DODGE JOURNEY

LOW BEAM: HID kit 9006 canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

2014 FORD F150

HEADLIGHTS: HID kit H13 bi-xenon canbus pro
FOGS: H10 canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

 

2004 VOLVO S80

LOW BEAM: HID kit H11 55W canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

No relay was required. DRLs are 12V.

 

2012 CHEVY SILVERADO

LOW BEAM: HID kit H11 55W canbus pro
HIGH BEAM: HID kit 9005 55W canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

No relay was required. DRLs are 12V.

 

2002 Ford Ranger

HEADLIGHTS: HID kit 9007/L 35W canbus pro
FOGS: HID kit H10 35W canbus pro

COLOR: 4300K
POWER: 35W
BULBS: Super Vision HID

 

2006 Dodge RAM 1500

Low beams: HID kit H1 35W canbus pro

INSTALLATION: Just plug and go.  No additional parts were required.
2001-vw-jetta-hid-installation.jpg  

2001 VW JETTA

HEADLIGHTS: HID kit 9007/L 35W canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

2004-porsche-cayenne-d1r.jpg  

2004 PORSCHE CAYENNE

HEADLIGHTS: D1S OEM HID

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

The most pleasant vehicle to work on EVER!

 

2015 GMC SIERRA

HEADLIGHTS: HID kit 9012 55W canbus pro w/relay 

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

2002 SUBARU IMPREZA

HEADLIGHTS: HID kit 9007 55W canbus pro

COLOR: 8000K
POWER: 55W
BULBS: Super Vision HID

 

2015 NISSAN SENTRA

HEADLIGHTS: HID kit H11 55W canbus pro

COLOR: 6000K
POWER: 55W
BULBS: Super Vision HID

 

2008 Dodge RAM 1500

HEADLIGHTS: HID kit H13 35W canbus pro

INSTALLATION: Resistors and capacitors were needed
 

2015 Dodge RAM 1500 ECO

HEADLIGHTS: HID kit H11 35W canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

INSTALLATION: Relay was needed, relay trigger - side marker lights
 

2015 Dodge RAM 1500 ECO

HEADLIGHTS: HID kit H11 35W canbus pro

COLOR: 6000K
POWER: 35W
BULBS: Super Vision HID

INSTALLATION: Relay was needed, relay trigger - side marker lights
 

2004 GMC DURAMAX

HEADLIGHTS: LED kit 9006 low, 9005 high 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

 

2008 TOYOTA TACOMA

LED HEADLIGHTS: LED kit H4 1800lm
FOG LIGHTS: HID kit H10 4300K canbus pro 

COLOR: 6000K
POWER: 50W
LED: CREE

 

PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit H4 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

 

PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit H4 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

LED HEADLIGHTS  

1991 LAND CRUISER

HEADLIGHTS: LED kit H4 1800lm
PHOTO: left side LED, right side HALOGEN

COLOR: 6000K
POWER: 50W
LED: CREE

 

2004 JEEP WRANGLER

HEADLIGHTS: LED kit H13 1800lm
PHOTO: left side HALOGEN, right side LED

COLOR: 6000K
POWER: 50W
LED: CREE

 

2011 CHEVY 3500

LOW BEAM: LED kit H11 1800lm
HIGH BEAM: LED kit 9005 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

led-headlights-2013-peterbilt.jpg  

2013 PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit 9007 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

 

2010 HONDA RIDGELINE

FOGS/DRL: LED kit 9005 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

 

FREIGHTLINER SEMI-TRAILER

HEADLIGHTS: LED kit H13 2600lm

COLOR: 6000K
POWER: 50W
LED: CREE

 

PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit H4 1800lm

COLOR: 6000K
POWER: 50W
LED: CREE

led-headlights-peterbilt.jpg  

PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit H4 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

2014 FORD F350

HEADLIGHTS: LED kit H13 3200lm
FOG LIGHTS: LED kit H10 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

2009 FORD F350

HEADLIGHTS: LED kit H13 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

CHEVY CRUZE

HEADLIGHTS: LED kit H13 3200lm LED
FOG LIGHTS: H11 3200LM LED

COLOR: 6000K
POWER: 64W
LED: CREE

led-headlights-silverado.jpg  

2008 CHEVY 2500

LOW BEAM: LED kit H11 3200lm
HIGH BEAM: LED kit 9005 3200lm
FOGS: LED kit H16 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

2015 FORD F350 LARIAT

HEADLIGHTS: LED kit H13 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

2008 DODGE RAM 3500

HEADLIGHTS: LED kit H13 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

50W H13 resistors were required

3200lm-led-9007-peterbilt.jpg  

PETERBILT SEMI-TRAILER

HEADLIGHTS: LED kit 9007 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

3200lm-led-volvo-vn780.jpg  

VOLVO VN780 SEMI-TRAILER

HEADLIGHTS: LED kit H11 3200lm

COLOR: 6000K
POWER: 64W
LED: CREE

 

2003 GMC Sierra

LOW BEAM: LED kit 9006 3200LM

COLOR: 6000K
POWER: 64W
LED: CREE

 

2003 Subaru Impreza WRX

HEADLIGHTS: LED kit 9007 2S 3600LM

COLOR: 6000K
POWER: 60W
LED: ETI

INSTALLATION: Just plug and go. No additional parts were required.

 

2013 Isuzu 4500 HD

HEADLIGHTS: LED kit 9007 2S 3600LM

COLOR: 6000K
POWER: 60W
LED: ETI

INSTALLATION: Just plug and go. No additional parts were required.

 

2012 Dodge RAM 1500

HEADLIGHTS: LED kit H13 2S 3600LM

COLOR: 6000K
POWER: 60W
LED: ETI

INSTALLATION: 2pcs H13 load resistors were required
2015-nissan-juke-8g-led-installation.jpg  

2015 Nissan JUKE

HEADLIGHTS: LED kit H11 8G 12000lm

INSTALLATION: resistors were not needed. LED drivers fit into the headlight. Dust cover fits over the bulb.
 

2006 Dodge RAM 1500

High beams: LED kit H1 2S 3600lm
Fogs: LED kit 9006 6G 3000lm LED

INSTALLATION: Just plug and go. No additional parts were required.
vw-westfalia-6g-led-3000lm.jpg  

VW WESTFALIA

HEADLIGHTS: LED kit 9004 6G 6000lm

INSTALLATION: Just plug and go. No additional parts were required.

2011-subaru-impreza-hatchback-led-headlights-r3.jpg  

2011 SUBARU IMPREZA

HIGH BEAM: LED kit H1 R3 9600lm

INSTALLATION: No additional parts were required.
2010-ford-f150-led-8g-installation.jpg  

2010 FORD F150

HEADLIGHTS: LED kit H13 8G 12000lm
FOG LIGHTS: LED kit H10 8G 12000lm

COLOR: 6000K
POWER: 36W
LED: CREE LED

 

2010 FORD F150

HEADLIGHTS: LED kit H13 8G 12000lm
FOG LIGHTS: LED kit H10 6G 6000lm
LED SIGNAL LIGHTS: 3157 canbus A/W

COLOR: 6000K
POWER: 36W
LED: CREE LED

 

2004 PORSCHE CAYENNE

FOG LIGHTS: LED H11 8000lm N1 LED kit

COLOR: 6000K
POWER: 25W
LED: SEOUL

 

2015 TOYOTA TACOMA

HEADLIGHTS: LED kit H4 12000lm 8G LED kit
FOG LIGHTS: LED kit H11 8000lm N1 LED kit

COLOR: 6000K
POWER: 36W headlights / 25W fogs
LED: H4 CREE/PHILIPS, H11 SEOUL

 

2006 VOLVO SEMI TRUCK

HEADLIGHTS: LED kit 9007 8000lm N1

COLOR: 6000K
POWER: 25W
LED: SEOUL

 

2013 VOLVO SEMI TRUCK

HIGH BEAM: LED kit 9005 12000lm 8G
LOW BEAM: LED kit H11 12000lm 8G

COLOR: 6000K
POWER: 36W
LED: CREE

 

HARLEY DAVIDSON

7" DOT Headlight
4.5" DOT fog lamps/driving lamps

COLOR: 6500K
POWER: 32W Low / 38W High
POWER: 30W Fogs
LED: CREE

 

2016 HONDA CIVIC

HEADLIGHTS: LED FACTORY OEM
FOG LIGHTS: LED kit H11 12000lm 8G LED kit

COLOR: 6000K
POWER: 36W

 

2016 Dodge RAM 1500 Ltd

HEADLIGHTS: LED kit 9005 16000lm S2
FOGS: LED 9006 8000lm N1

INSTALLATION: Anti-flicker modules were needed
 

2012 GMC Sierra

LOW BEAM: LED kit H11 12000lm 8G
HIGH BEAM: LED kit 9005 1200lm 8G
FOGS: LED kit H16 6000lm 6G

COLOR: 6000K
POWER: 36W

 
20-inch-dual-color-led-bar-installation.jpg  

2011 DODGE RAM 3500

LED BAR - 20" CURVED, DUAL COLOR, CREE LED light bar with remote control

COLOR: WHITE/AMBER
POWER: 120W

 
 

2015 GMC Sierra

HEADLIGHTS: LED kit 9012 8G 12000lm

INSTALLATION: 9012 Anti-flicker harnesses were needed
 

DODGE RAM

LED BAR - 40" CREE LED 

COLOR: 6000K
POWER: 240W

 

FORD F350

LED BAR - 20" CREE LED

COLOR: 6000K
POWER: 120W

 

NISSAN XTERRA

LED BAR - 20" CREE LED

COLOR: 6000K
POWER: 120W

 

2011 DODGE RAM 3500

LED BAR - 12" CREE LED

COLOR: 6000K
POWER: 72W

 

DODGE RAM

LED BAR - 20" CREE LED

COLOR: 6000K
POWER: 120W

 

NISSAN XTERRA

LED BAR - 20" CREE LED

COLOR: 6000K
POWER: 120W

 

97 TOYOTA FORERUNNER

LED BAR - 20" CREE LED

COLOR: 6000K
POWER: 120W

H4/L HID 4300K 35W canbus pro kit

13.5-inch-4d-led-bar.jpg  

SUBARU

LED BAR - 13.5" CREE LED with 4D lens

COLOR: 6000K
POWER: 72W
LUMENS: 15120

 

2014 Dodge RAM 1500

LOW BEAMS: HID kit H11 canbus pro
HIGH BEAMS: HID kit 9005 canbus pro

COLOR: 8000K
POWER: 35W
BULBS: Super Vision HID

hid-installation-2003-dodge-ram.jpg  

2003 Dodge RAM 1500

HEADLIGHTS: HID kit 9007 w/relay and w/dual 50W 8 Ohm resistors

COLOR: 6000K
POWER: 35W

led-installation-2012-dodge-ram.jpg  

2012 Dodge RAM 1500

HEADLIGHTS: LED H13 12000lm 8G series
Fogs: LED H10 8000lm S1 series

COLOR: 6500K

led-installation-2008-dodge-ram-3500.jpg  

2008 Dodge RAM

HEADLIGHTS: LED H13 12000lm 8G series w/anti-flicker modules
Fogs: LED 9005 6000lm X3 series

COLOR: 6500K

led-installation-2001-infiniti-qx4.jpg  

 2001 Infiniti QX4

FOG LAMPS: LED kit H3 NS series 40W 11000lm, dual color white/yellow

led-installation-2015-dodge-ram-1500.jpg  

2015 Dodge RAM 1500

FOG LAMPS: LED kit 9005 NS series 40W 11000lm, dual color white/yellow

led-installation-2003-dodge-ram-diesel.jpg  

2003 Dodge RAM Diesel

HEADLIGHTS: LED kit 9007 8000lm 7G series w/resistors w/anti-flicker modules
Fog lights - 9006 6000lm X3 Series

hid-installation-2008-dodge-ram.jpg  

2008 Dodge RAM

HEADLIGHTS: HID kit H13 35W 6000K canbus pro HID kit w/relay w/resistors w/capacitors

 2015-dodge-ram-longhorn-led.jpg  

2015 Dodge RAM Longhorn

FOG LIGHTS: LED kit 9006 NS, dual color white/yellow

 2017-dodge-ram-longhorn-led-install.jpg  

2017 Dodge RAM Longhorn

HEADLIGHTS: LED kit 9005 Q7 w/anti-flicker harness. Modification was required to the back of the headlight cover for the bubs to fit in.

FOG LIGHTS: LED kit 9005 S1, all in one LED bulb, direct plug-in

 led-installation-2011-chevrolet-silverado.jpg  

2011 GMC SILVERADO

HEADLIGHTS: LED kit H11 12000lm 8G series, color 6500K, CREE LED

 2015-gmc-sierra-led-installation.jpg  

2015 GMC SILVERADO

HEADLIGHTS: LED kit 9012 11000lm Q7 series, color 6500K

2003-dodge-ram-3500-led-installation-sm.jpg  

2003 DODGE RAM 3500 DIESEL

HEADLIGHTS: LED All-in-one 9007 8000lm S1 Series, color 6500K

Anti-flicker modules were needed.

 2016-ford-expedition-low-beam-h11-led-headlight-kit-install-1200lm-8g.png  

2016 FORD EXPEDITION

HEADLIGHTS: LED kit H11 8G 12000lm
COLOR: 6000K
POWER: 36W 
LED: CREE LED

2015-toyota-tacome-led-headlight-install.jpg  

2015 TOYOTA TACOMA

HEADLIGHTS: LED kit H4 8G 12000lm
COLOR: 6000K
POWER: 36W
LED: CREE

FOG LIGHTS: H11 X3
COLOR: 6000K
POWER: 25W

2010-gmc-duramax-3500-led-bar-install.jpg  

2011 CHEVY DURAMAX 3500

LED LIGHT BAR: 22" 270W Tri-row
COLOR: 6000K
POWER: 270W 
LED: CREE
Lumens: 25920

2010-audi-q5-led-fogs.jpg  

2010 AUDI Q5

HEADLIGHTS: HID D3S
COLOR: 6000K

FOG LIGHTS: H11 N1
BRIGHTNESS: 4000lm/bulb
COLOR: 6000K
POWER: 25W
LED: CSP

 201-audi-q5-led-2.jpg  

2010 AUDI Q5

HEADLIGHTS: HID D3S
COLOR: 6000K

FOG LIGHTS: H11 N1
BRIGHTNESS: 4000lm/bulb
COLOR: 6000K
POWER: 25W
LED: CSP

 2009-jeep-wrangler-led-headlights-markers-signal-lights.jpg  

2009 JEEP WRANGLER

HEADLIGHTS:
7" 105W LED, 6000K

SIDE MARKER LIGHTS:
LED clear lens with Amber LED

SIGNAL LIGHTS:
LED clear lens with Amber LED

 2009-jeep-wrangler-led-headlights-markers-signal-lights-1.jpg  

2009 JEEP WRANGLER

HEADLIGHTS: 
7" 105W LED, 6000K

SIGNAL LIGHTS: 
LED clear lens with Amber LED

 led-install-2003-dodge-ram.jpg  

2003 DODGE RAM 3500 DIESEL

HEADLIGHTS: LED All-in-one 9007 8000lm S1 Series, color 6500K. Anti-flicker modules were needed.

FOG LIGHTS: LED 9006 X3

 2017-toyota-tacoma-led-install-fog-lights-head-lights.jpg  

 2017 TOYOTA TACOMA

HEADLIGHTS: LED H11 8G series low beam and high beam

FOG LIGHTS: LED H11 X3 series

Installation notes:
Anti-flicker modules were not needed.

2000-volvo-s70-led-headlights-installation.jpg  

2000 VOLVO S70

HEADLIGHTS: LED H7 8G Series, 12000lm, CREE

FOG LIGHTS: H1 - fit only an H1 halogen bulb. Cannot use an H1 LED kit because of the way the bulb is secured in fog light.

Installation Notes:
Bulb and LED driver fit under the OEM hard plastic cover without any problems. LED driver fit inside the headlight. Factory H7 retaining clip works fine. 

 gmc-denali-led-headlights-led-small.jpg  

 GMC DENALI

HEADLIGHTS: LED H11 7G Series low beam, and LED 9005 8G Series high beam

Installation notes:
Simple plug-n-play, no afm modules needed

2018-hyundai-sonata-led-install.jpg  

2017 HYUNDAI SONATA

HEADLIGHTS: H11 S2 LED kits installed in low beam and high beam.

Installation notes:
Simple plug-n-play installation. AFM module was not required. S2 bulb fit directly under the OEM dust cap. No modifications were required.

2012-kia-hid-install.jpg  

2012 KIA OPTIMA

HEADLIGHTS: H11 42W ASIC CANBUS HID kit

FOG LIGHTS: H11 42W ASIC CANBUS HID kit

Installation notes:
Standard canbus HID ballasts worked initially but eventually lights would randomly not turn on, or would not come on at all in AUTO light setting. Using the ASIC ballast was the only way to fix the problem. Capacitors, decoders, and resistors had no effect and the problem persisted.

2015-jeep-wrangler-led-headlight-installation.jpg  

2015 JEEP WRANGLER

Headlights: 7" 60W LED

Installation notes:
Canbus anti-flicker modules were needed

2016-toyota-highlander-led-headlight-and-fog-light-installation.jpg  

2016 TOYOTA HIGHLANDER

Low beam: H11 8G Series LED
High beam: 9005 8G Series LED
Fogs: H11 X3 Series LED

Installation notes:
Plenty of space for any LED kit. No dust caps. Decoder modules were not needed.

2016-ford-f150-led-headlight-installation.jpg  

2016 FORD F-150 XLT Sport

Headlights: H11 G10 LED kit. LED driver and the LED bulbs fit perfectly under the dust cap. Canbus modules were not needed.

Fogs: 9005 S1 LED kit proved to be the best one for the job. LEDs aligned perfectly at 3 and 9 o'clock without any adjustment.

Installation notes:
This was one UGLY job! Too much stuff needs to be removed to get to the headlights.

2016-honda-crv-led-headlight-and-fog-light-installation.jpg  

2016 HONDA CR-V

Headlights: H11 G5 Series LED kit
Fogs: H11 G5 Series LED kit

Installation notes: 
Headlight LED installation was very easy. There is a lot of room behind the headlight and no dust cap to deal with. Fog trim had to be removed from the front to get access to the screw holding the fog lamp in place. There is limited room behind the fog light, but any LED kit with a fan up to 4cm will fit in there without a problem. 

 2014-dodge-ram-led-headlight-and-fog-light-installation.jpg  

 2014 DODGE RAM

Low/High beam: 9012 G10 LED kit
Fogs: 9006 X3 LED kit

Installation notes: 
Perfect fit under the dust cap. No drilling. Anti-flicker Decoder Modules were not needed. No flickering. No shutting off of lights.

 2012-dodge-ram-led-headlight-and-fog-light-installation.jpg  

 2012 DODGE RAM

Low beam: H11 8G Series
High beam: 9005 G10
Fogs: 9145 (H10) X3

Installation notes:
Low beam H11 8G bulbs fit perfectly under the dust caps. No drilling required. H11 decoder was required. Easy access to fogs. 

2014-cadillac-srx-led-headlight-installation.jpg  

2014 CADILLAC SRX

Low/high beam: H11 S2 Series without canbus

Installation notes:
15 minute job from start to end. Anti-flicker modules were not needed. No error codes. The S2 bulb fits nicely under the rear headlight cap. 

2010-doge-ram-led-headlight-installation.jpg  

2010 DODGE RAM

Low beam: H11 S2 CSP Series without canbus

Installation notes: 
H11 S2 bulbs fits perfectly under the OEM dust cap. Anti-flicker modules, relay, or resistors were not needed.

2011-chevy-colorado-hid-low-beam-and-fogs-installation-gallery.jpg  

2011 CHEVY COLORADO

Low beam: 9006 6000K 35W HID kit
Fogs: 9005 35W 6000K HID kit

Installation notes:
Straight plug-n-play without using a relay capacitors or resistors

 2006-nissan-pathfinder-9007-high-low-led-s2-series-headlight-upgrade-installation-gallery-photo.jpg  

2006 NISSAN PATHFINDER

Low/High beam: 9007 S2 LED kit without canbus

Installation notes:
10 minute job. Remove halogen bulbs and install new led bulbs. Easy! Easy!

2016-ford-f150-xlt-h11-g10.jpg  

2016 FORD F-150 XLS

Low beam: H11 G10 w/canbus LED kit. LED driver and the LED bulbs fit perfectly under the dust cap. No external canbus module was needed.

Fog Lights: 
9005 S1 LED kit proved to be the best one for the job. LEDs aligned perfectly at 3 and 9 o'clock without any adjustment.

 2017-dodge-ram-longhorn-led-9005-g10.jpg  

2017 DODGE RAM LONGHORN

Low beam: 9005 G10 LED kit w/canbus
High beam: 9005 G10 LED kit w/canbus

Installation Notes:
Both high and low beam kits needed adjustment for the LEDs to face 3 and 9 o'clock.

2011-dodge-ram-3500-led-upgrade.jpg  

2011 DODGE RAM 3500

Low beam: H11 8G LED kit
Fogs: H10 X3 LED kit

Installation notes:
There is lots of room in the headlight for any LED kit series - low beam only! High beam is very tight and only the G10 series LED kit will fit. There is plenty of room behind the fog lights to accommodate any LED kit. Decoders were not needed for any of the lights. Anti-flicker modules were not needed. Lights work 100% in AUTO, and ON headlight positions without flickering. No dash errors.

 2017-hyundai-santafe-led-headlight-upgrade.jpg  

2017 HYUNDAI SANTAFE

Low beam: 9005 G10 canbus 10000lm LED kit. Perfect fit under the existing dust cap. No flickering. No dash light warnings. 

Installation notes:
15 minute job. Remove dust covers, remove halogen bulbs and install new led bulbs.

2014-nissan-titan-led-upgrade-headlights-fog-lights-gallery-photo.jpg  

2014 NISSAN TITAN

Low beam - 9006 G10 10000lm LED kit
Fogs - 880 X3 6000lm LED kit

Installation notes:
Super easy install. One screw to undo in each wheel well to gain access to the back side of the headlights. Bulbs install easily. There is plenty of room for any LED kit for headlights and fog lights. No dust caps to deal with. After installing these kits, lights worked as expected without any flickering or dash light errors.  

 2003-toyota-tundra.jpg  

 2003 TOYOTA TUNDRA

Headlight - H4 S2 H/L 16000lm LED kit

Installation notes: 
Super easy installation although the battery and the air box had to be moved slightly for the bulbs to slide into the headlights.

2017-nissan-versa-note-hid-upgrade.jpg  

2017 NISSAN VERSA NOTE

Headlights - 9007 bi-xenon 35W 6000K HID kit with canbus ballasts and relay
Fog lights - H11 35W YELLOW HID kit with canbus ballasts

2013-ford-flex-led-headlights.jpg  

2013 FORD FLEX

Headlights - H13 8G 12000lm LED kit
Fog lights - H11 X5 6000lm LED kit

2014-dodge-ram-1500-led-upgrade-high-beam-1.jpg  

2014 DODGE RAM 1500

Low beam - 9012 G10 10000lm LED kit
High beam - 9005 G10 10000lm LED kit

Installation notes:
Space is very tight under the dust cap, so the G10 with built-in canbus decoder and anti-flicker module is the only LED kit that will fit without any modification to the dust cap. Beam adjustment was required.  

 2006-dodge-ram-3500-led-upgrade.jpg  

 2006 Dodge RAM 3500

Headlights - H13 S2 3-sided 16000lm LED kit, all-in-one bulb design with cooling fan, no external LED driver. Very popular and very bright.

Fog lights - 9006 7G LED kit, no cooling fans, external LED driver. 7G series is sold out.

Installation Notes: H13 canbus anti-flicker modules were needed as well as 50W dual resistors to stop the lights from shutting off. Fog lights were just a straight plug-in.

2012-dodge-ram-led-upgrade.jpg  

2012 Dodge RAM with after-market headlights

Low beam - H1 R3 80W 9600lm copper ribbon cooled LED kit

Installation notes:
Super easy installation although the existing dust caps had to be replaced with Z1 rubber dust caps. No anti-flicker modules were needed.

 2015-gmc-sierra-hid-installation.jpg  

 2015 GMC SIERRA

Headlights - 9012 Low/high beam HID, 55W, ASIC canbus ballasts

Fogs - H16, HID, 6000K, 35W canbus pro ballasts

Installation notes: 
Regular canbus ballasts did not work in the headlights. ASIC ballasts did. Fogs are hard to get to because of the frame around them. 

 2015-gmc-sierra-9012-led-kit-upgrade.jpg  

2015 GMC SIERRA

Headlights - Projector style, High/Low in one - 9012 S2 16000lm LED kit

Installation Notes:
Super easy 5 min DYI install. Any led kit we sell will fit under the dust cap.

 2017-dodge-ram-h11-led-upgrade.jpg  

 2017 Dodge RAM

Low beam - H11 S2 16000lm LED kit, canbus decoder modules are required to prevent the lights from flashing.

Installation notes:
H11 S2 LED series fits directly under the low beam dust cap. Decoder fits inside the headlight as well.

2014-hyundai-santa-fe-hid-install.jpg  

2013 HYUNDAI SANTA FE 2.0 TURBO SPORT

Low beam - H11 6000K ASIC canbus HID kit
High beam - H7 6000K ASIC canbus HID kit
Fogs - H11 6000K ASIC canbus HID kit

Installation notes:
If installed with canbus pro ballasts lights flicker and shut off. Must use ASIC HID kits. All bulbs are easily accessible. Install time 2-2.5hrs. H7 bulbs do not need HID bulb adapters. No relays are needed because DRL is the led strip above the headlights.

 2015-gmc-sierra-sle-1500-9012-g10-led-kit-sm.jpg  

2015 GMC SIERRA SLE 1500

Headlights - Projector style, High/Low in one - 9012 G10 10000lm LED kit

Installation Notes:
Super easy install. Any led kit we sell will fit under the dust cap, but we chose the G10 LED series because of its LED alignment capability. We tried 3 other non-adjustable LED kits but the LED location was always wrong and light reflected wrongly.

2014-dodge-ram-led-headlight-upgrade-9012-g10-led-kit-gallery.jpg  

2014 DODGE RAM

Headlights - Projector High/Low upgraded to 9012 G10 10000lm LED kit

Installation notes:
Simple plug-n-play 30-40 minute install. No modifications were necessary to the dust caps. LED bulbs needed vertical alignment to reflect properly.

 2014-toyota-tundra-led-headlihgt-and-foglight-upgrade-small.jpg  

 2014 TOYOTA TUNDRA

Headlights - H4 GT LED kit 18000lm
Fog Lights - H11 G10 LED kit 10000lm

Installation notes:
Grille has to come off, headlights have to be removed. Fogs can be accessed from the top once the headlights are out. Time required 1.5-2 hrs. Canbus is not required for headlights or fogs. 

2003-toyota-4runner-h11-gt-led-headlight-upgrade-sm.jpg  

2003 TOYOTA 4RUNNER

Headlights - 9006 GT LED kit, 18000lm, no flickering, canbus kit is NOT needed

Installation notes:
10 minutes. Just reach in and swap the bulbs.

 2005-gmc-sierra-led-headlight-and-fog-light-upgrade-small.jpg  

 2005 GMC SIERRA

Low beam - 9006 C6 LED kit, 7600lm, plug-n-play, no antifi-flicker decoders are needed
Fog lights - H10 X5 Series LED kit, 6000lm, fanless

Installation notes:
10 minute install for both headlights and fog lights.

2001-dodge-ram-9004-led-headlight-kit-installation-small.jpg  

2001 DODGE RAM

Headlights - 9004 H/L C6 72W 7600lm LED kit

Installation notes:
Anti-flicker decoders were not needed. Bulbs can be reached from the back of the headlight, but space is very tight.

2007-saab-93-led-headlight-kit-install-small.jpg  

2007 SAAB 93

Low beam - H7 P7 ECCENTRIC 9000lm 48W LED kit with CREE LED, fanless w/external LED driver.

Installation notes:
Rubber dust caps on the back of the headlights easily accommodate all types of LED kits. LED bulb adapters are required but original adapters can be modified to fit the bulbs by increasing their inner diameter. Air box on passenger side can be removed for easy access. The whole headlight on the driver side needs to be removed to have decent access to the back of the headlight. Anti-flicker decoders were not needed.

Side Note: when the vehicle is shut off and locked or keys are removed from ignition, led bulbs flash at a slow rate (once every 3 seconds) for about 30-45 seconds after which the flashing stops. If anyone has any idea how to fix this, leave a message below.

vw-jetta-led-headlight-and-fog-light-install-small.jpg  

2014 VW JETTA TDI

Headlights: H7 V6 7200lm 48W, fan cooled, external led driver, non-canbus, LED kit

Fog Lights: 9006 V6 7200lm 48W, fan cooled, external led driver, non-canbus, LED kit 

Installation notes:
Space is really tight on the drivers side. Passenger side is okay for access. Fitting the low beam LED bulb and adapter into the headlight requires patience. Time required is about 1-2hrs of time including fog lights. Fog lights are easily accessed from the front.

 2004-gmc-sierra-3500-led-upgrade-high-beam-small.jpg  

 2004 GMC Sierra 3500

Low beam - halogen
High beam - 9005 S2 Series LED 16000lm
Fog lights - H10 X3 Series, all-in-one, fanless, 6000lm

Installation notes:
Headlights have to be removed but it only takes 1 minute to do so. Fogs are accessible form the bottom of the vehicle. Replacing everything takes max 15 min.

1996-toyota-4runner-led-headlight-upgrade-small.jpg  

1996 TOYOTA 4RUNNER

Headlights: H4 LED X7 Series 14000lm, high/low compatible

Installation notes:
20 minute install. Center opening in the rubber dust caps had to be enlarged to accommodate the fan size. Otherwise, easy, straight forward install.

 2017-jeep-wrangler-led-headlight-install-130w.jpg  

 2017 JEEP WRANGLER

Headlights - 7" 130W LED headlights, low and high beam are functional, AUTO/ON operates without decoders

Installation notes:
Use of decoders is suggested if you're planning to use these lights in "parking light" mode. Auto and ON modes are fine and do not flicker. In "parking light" mode, the upper and lower DRL / signal lights flicker without the decoder; the main lights (low and high) do not flicker.

2006-dodge-ram-3500-led-headlight-upgrade-small.jpg  

2006 DODGE RAM 3500 DIESEL

Headlights: H13 LED 8G 12000lm Series

Installation notes:
30 minute install. No flickering in auto, off, on, DRL light modes, but customer wanted to install anti-flicker decoders anyways.

 

 2013-jeep-grand-cherokee-laredo-headlight-fog-light-led-upgrade-sm.jpg  

2013 JEEP Grand Cherokee Laredo LED Upgrade.

Headlights - H11 G10 10000lm canbus LED kit
Fogs - H16 V10 3600lm LED kit

Installation notes:
45 min install. Both low beam and fogs are accessed through the wheel well, and are quite easy to get to. Canbus decoders were not needed for either set. No flickering. No dash error codes.

2017-f150-h10-dual-color-fogs-white.jpg  

2017 Ford F150

Fogs - H10 dual color M1D - LED white color shown

2017-f150-h10-dual-color-fogs-yellow.jpg  

2017 Ford F150

Fogs - H10 dual color M1D - LED with halogen OEM color shown

 

 

 

2006-lexus-is350-dual-color-fogs-and-led-grille-badge-white.jpg  

2006 Lexus IS350

Fogs - 9005 dual color J1D - white color shown

Installaton notes:
Super easy through wheel wells. DIY 15 min.

Installation notes: See -> Lexus LED Badge

2006-lexus-is350-dual-color-fogs-and-led-grille-badge-yellow.jpg  

2006 Lexus IS350

Fogs - 9005 dual color J1D - yellow color shown

Installaton notes:
Super easy through wheel wells. DIY 15 min.

2006-dodge-charger-srt-led-headlight-and-fog-light-upgrade-small.jpg  

2006 DODGE CHARGER SRT

Headlights - Low beam 9006 X7 14000lm 90W CANBUS LED kit.

Headlights - High beam 9005 - none of our LED kits even with canbus anti-flicker decoders and cancellers were able to stop LED flutter. Customer took the vehicle to a Dodge dealership who claimed to have a solution, but the same thing happened there. We decided to leave halogens in for now and order standard 9005 LEDs.

Fog lights - 9005 C6 7200lm 72W LED kit. SOLD OUT

Marker/Signal Lights - 3157 20pc Canbus LED bulbs. No hyperflash

Installation notes: 
Headlight bulbs are easy to get to. Lots of room behind headlights for any LED kit series to fit. Fogs are accessed through wheel wells fairly easily also.

 2012-kia-optima-high-beam-h1-led-upgrade-small.jpg  

2012 KIA OPTIMA

High Beam - H1 G10 LED Upgrade

Hi-beam DRL's operate at full voltage!

Installation notes:
There is absolutely no room under the dust cap for anything else but the G10 series. LED driver fits inside the headlight. No flickering in DRL or high beam mode. Easy to get to on passenger side. Battery removal is recommended for driver side. Just in case you're wondering, DRL's do run at full voltage. Installation time - 1hr.

 2013-chevrolet-cruze-led-headlight-and-fog-light-upgrade-small.jpg  

2013 CHEVROLET CRUZE

Headlight LED upgrade - H13 H/L 8G Series LED kit
Fog Light LED upgrade - H11 S1 series LED kit

Installation notes:
Headlights are easy to get to without removal of anything except the windshield washer fluid downspout on the driver's side. H13 8G LED bulb adjustment holes did not match the needed orientation of the LEDs, so new holes had to be drilled in the H13 adjustment ring, 5 min job.

Fog light LED upgrade was not a fun job at all. To gain access to the back of the fog lights, passenger side plastic cover under the bumper had to be removed. There is enough room to fit an led bulb in, so long as the led cooling fins are not too long. Driver side installation is another story. There is barely enough room to slide your hand between the back of the fog lamp and the windshield washer reservoir. We had to remove the front molding around the fog lamp as well as the wheel well lining and the plastic cover under the bumper to have unobstructed access to the back of the fog lamp. Installation time for everything was 1.5hrs.

 2015-jeep-cherokee-9012-asic-canbus-hid-kit-installed-back-of-the-headlight-small.jpg  

 2015 JEEP CHEROKEE

Headlight - High/low - 9012 55W 6000K ASIC canbus HID kit

Installation notes:
Headlights are accessed through the wheel wells. There are 3 screws that need to be taken out and the wheel well lining can easily be moved to the side. There are large plastic dust caps on the back of each headlight. You will need to drill a 1" hole in each dust cap so you can run the wires out to the ballasts. Ballasts can be mounted on a small shelf below each headlight. Easy 1 hr job.

2013-chevy-suburban-sm.jpg  

2013 Chevy Suburban

Low beam LED upgrade - H11 G10 10000lm LED kit
Fog light LED upgrade - H16 X5  6000lm LED kit

Installation notes:
There are 2 headlight bolts on top of the headlight which need to be removed so you can get your hand in behind the headlight. After that it is easy to remove and replace the bulbs.

WARNING:
There is a vertical frame bar next to the low beam bulb giving you only 1-2 cm of space to deal with. This means that any rib or fan cooled LED kit will not fit! The only kit that fits is the H11 G10 series copper ribbon cooled LED kit.

 2012-dodge-ram-3500-led-headlight-led-fog-light-upgrade-small.jpg   2012 Dodge RAM 3500 LED Upgrade

LED headlights - H11 X7 14000lm 90W canbus LED kit
FOG lights - H10 (9145) 9000lm 40W fanless LED kit

Installation notes: 

H11 X7 bulb and driver fit directly under the dust cap without any modification; no flicker, no dash error codes, adjustment was needed to align LEDs to 3 and 9 o'clock. H10 fits directly into the fog housing, simple plug-n-play connection. S1P series is perfect for fogs because it has no moving parts and the back of the bulb can be exposed to elements. Install time about 45min.
2017-dodge-ram-led-headlights-led-fog-lights.jpg  

2017 DODGE RAM - LED HEADLIGHT AND LED FOG LIGHT UPGRADE

Low beam - 9005 G10 10000lm ribbon cooled LED kit
Fogs - 9006 J1D 8000lm dual color white/amber LED kit

Installation notes:
Super easy 45 min install. No extra decoders or parts were needed for any of the LED kits.

 2014-dodge-ram-1500-hid.jpg  

2014 DODGE RAM 1500

Low beam - H11 HID
High beam - 9005- HID

We only repaired this installation by installing 2 new 35W canbus HID ballasts, and a set of 9005 6000K HID bulbs.

fb-2015-dodge-durango-sm.jpg  

2015 DODGE DURANGO

Low/High beam - 9012 55W 6000K ASIC canbus HID kit with 9012 relay

Installation notes:
Relay trigger is connected to the side marker light power wires NOT headlight power wires.

 2018-dodge-ram-led-upgrade-small.jpg   2018 DODGE RAM

Low beam - H11 X7 14000lm LED kit with canbus anti-flicker decoders

Fogs - 9006 X3 6000lm fan-less LED kit

Installation notes:
Super easy install. Low beam H11 X7 fit directly under the dust cap without any modification, and the decoders fit inside the headlights. LED location on both low beam and fogs had to be adjusted to reflect properly. LEDs in the fogs had to be adjusted to face up and down, while in the headlights they were rotated to face left and right.

2019-hyundai-kona-led-upgrade-small.jpg  

2019 Hyundai Kona LED Headlight Upgrade

Low beam - H7 G10 10000lm fanless LED kit with H7 LED Bulb Lock Base Adapter (Q25)

 2018-dodge-ram-1500-hid-upgrade-sm.jpg  

2018 Dodge RAM 1500 - HID upgrade

Headlights - 9005 ASIC 6000K HID kit with 9005 decoders

Fogs - 9006 CANBUS PRO HID kit with 9006 decoders.

Installation notes:
Headlights and Fog Lights will not work without the canbus anti-flicker decoders.

 2003-dodge-ram-3500-sm.jpg  

2003 DODGE RAM 3500 LED UPGRADE

Headlights - 9007 hi/lo, X7 canbus LED kit, 14000lm, 90W

Fogs - 9006 M1 LED kit, 8000lm, 40W

Super Canbus Decoder Links:
Headlights 9007, Fogs H10

Installation notes:
Super easy plug-n-play installation. Fog 9006 LED bulbs needed a thinner o-ring to fit into the fog lights. Additional super canbus decoders were needed for low beam and fogs to get rid of the "bulb-out" warning light.

 2004-vw-jetta-9007-gt-ledkit-2-sm.jpg  

2004 VW Jetta LED upgrade

Headlights - 9007 Hi/Lo GT Series CREE LED kit.

Installation notes:
No anti-flicker decoders were needed. Lots of space available under the dust cap to fit the GT's fan and LED driver inside the headlight without any modification.

 2006-honda-civic-9006-x9-led-kit-1-sm.jpg  

2006 Honda Civic LED Upgrade

Low beam - 9006 X9 Series FCiP LED kit

Installation notes:
Anti-flicker decoders were not needed. Simple 20 min installation, although access to the back of the headlights is very restricted.

 2006-nissan-frontier-9007-s7-led-kit-3-sm.jpg  

2006 Nissan Frontier LED Upgrade

Headlights - 9007 Hi/Lo S7 LED kit with headlight lens warming function

Installation notes:
Super easy installation. Easy access to both headlights from engine compartment. Bulb adjustment is needed because this LED kit produces light from only one side of the LED bulb in low beam and both in high beam. This requires the low beam LED to face the bottom of the reflector and the high beam top of the reflector, in order to have proper beam positioning when cycling from lo to high beam. If installed facing left and right, the light in low beam reflects only from one half of the reflector. Beam adjustment is done simply by rotating the bulb in the headlight until the desired position is reached.

 2018-mitsubishi-outlander-led-upgrade-h7-g10-led-kit-sm.jpg  

2018 Mitsubishi Outlander LED Upgrade

Low beam - H7 G10 canbus fan-less LED series + Q4 bulb adapters

Installation notes:
There is ample room inside the headlight to fit absolutely any LED kit in. You do need H7 bulb adapters (Q4 series) to lock the LED bulbs in place. Other than that super easy install with plenty of room to get to the back of the headlights. Adjustment is not needed on H7 bulbs because they fit only one way.

 2014-jeep-trailhawk-sm.jpg  

2015 Jeep Cherokee Trailhawk LED upgrade

Low beam - 9012 (HIR2) Z3 CANBUS 8000lm 48W LED kit with external LED driver and 4 copper cooling ribbons. 

Fogs - H16 (5202, 12086, PSX24, PSX24W) 5S PLUS 4000lm 45W ZES LED kit, fan-less with blue aluminum ribbon cables, and external LED driver. 

Installation Time: 1hr 51min

Both sides are relatively easy to get to through the wheel wells. Passenger side is a bit more crowded but still easy to get to. The bulk of the installation time was spent on properly aligning the LED bulbs, so they would reflect well from the reflector housing in fogs and projector housing in headlights. Once installed, both kits performed well, without flickering or error codes. No extra canbus anti-flicker modules were needed.

 2013-vw-jetta-led-headlight-and-fog-light-upgrade-white-fogs-sm.jpg

2013-vw-jetta-led-headlight-and-fog-light-upgrade-yellow-fogs-sm.jpg

 

2013 VW Jetta LED Upgrade

Low beam - H7 G10 10000lm 90W canbus LED kit
Fogs - 9006 J1D dual color 8000lm 40W LED kit

Installation notes:
H7 bulbs are held in place by a retaining spring wire, so you don't need H7 VW LED bulb adapters. There is little space inside the headlights to accommodate fanned LED kits, that is why the H7 G10 was the best choice for this vehicle. Driver side is very tight, but with lots of patience the spring clip can be clipped into place. Passenger side is very easy to get to and takes only a few minutes.

Fogs are accessed by removing 4 screws in the wheel well lining which can then easily be moved to the side for bulb access. Simple plug-n-play install. Zip tie each LED driver to existing wiring to keep it from pulling on the bulb.

Headlight adjustment was needed after the install.

 2017-nissan-rogue-small-.jpg  

2017 Nissan Rogue LED Upgrade

Low beam - H11 X9 10000lm 90W FCiP LED kit
Fogs - H11 M1 8000lm 40W CSP LED kit

Installation notes:
30 min install. Low beams are easy to get to and have no dust caps. High beams have round dust caps. Fogs get accessed through a lower panel. DRL run at full voltage. Canbus anti-flicker decoders are not needed. 

2016-dodge-ram-laramie-eco-diesel-led-upgrade-gallery.jpg

 

2016 DODGE RAM LARAMIE ECO DIESEL

Low beam - 9005 X9 10000lm 90W FCiP LED kit + 9005 canbus super decoders
Fogs - 9006 5S+ 8000lm 45W ZES LED kit

Installation notes:
1 hr install. No modification to the dust caps was required because the X9 LED bulbs fit under it perfectly. X7 series fits as well. LED fogs needed to be adjusted so they would point up and down because the fog reflectors are vertical. Canbus decoders were used with the X9 low beam LED kit

2017-dodge-ram-1500-sport-led-upgrade-gallery-2.jpg

2017-dodge-ram-1500-sport-led-upgrade-gallery-1.jpg

 

2017 DODGE RAM 1500 SPORT

Low beams - 9005 6000K 55W ASIC canbus HID kit
Fogs - 9006 J1D 8000lm 40W DUAL COLOR LED kit

Installation notes:
2 hr install. Dust caps had to be drilled to run wires out to the HID ASIC ballasts. LED bulbs in fogs had to be adjusted to reflect vertically.

 2010-dodge-ram-2500-led-headlight-and-fog-light-upgrade-sm.jpg  

2010 DODGE RAM 2500 LED HEADLIGHT AND FOG LIGHT UPGRADE

Headlights: H13 Hi/Lo GT Series CREE 90W 18000lm LED kit
Fog lights: H10 (9145) 40W 9000lm CSP LED kit
Relay with Remote Control for fogs

Installation notes:

Fairly straight forward easy 1hr install. Fogs were not wired to the truck so a relay with remote control was used to provide power and remote functionality for turning fogs on/off. Cab mounted power switch comes with the relay but was not installed.

Headlights worked in Auto/ON in the shop but as soon as the truck was outside and lights switched to DRLs in Auto mode the lights flashed 3x and then shut off. The problem was caused by the super canbus decoders. Once we eliminated them and plugged the H13 GT LEDs directly into the factory H13 headlight harness, the lights switched to high beam in DRL AUTO mode and stayed on. So, do not use any decoders in this install if you want the lights to stay on in AUTO mode and DRLs on in daytime.

 2016-ford-f350-hid-upgrade-sm-.jpg  

2016 Ford F350 - HID Headlight Upgrade

Hi/Lo beam - H13 55W Hi/Lo ASIC canbus HID kit w/relay

Installation notes:
Medium difficulty. Grille and headlights have to be removed. Top of the grille has 4 screws and the bottom has 4 tabs which have to be pushed down on to release the grille. Headlights are held in place with 3 screws all accessible from the front of the vehicle. Installation time about 1hr.

1999-bmw-328i-9006-x7-led-upgrade-sm-.jpg  

1999 BMW 328i - LED headlight upgrade

Low beam - 9006 X7 Series 90W 14000lm canbus

Installation notes: super easy plug-n-play install. Installation time about 10 minutes.

 2005-mazda-3-led-upgrade-0.jpg  

2006 Mazda 3 LED upgrade.

Low beam - H7 P7 ECCENTRIC 9000lm 48W LED kit with CREE LED, fanless w/external LED driver

Installation notes:
Install time 2hrs. Bulbs are help in the headlight by a spring wire. Bulb adapters were required for the bulbs to stay in place. All Mazda 3 adapters were too long, so they had to be cut down to 1.4cm to fit the LED bulb. Anti-flicker decoders were needed to prevent the lights from minute flickering in DRL. With lights ON there was no issue. Deeper rubbed dust caps were used because the OEM bulbs used regular H4 rubber dust caps with a hole in the center which did not fit. Factory H4 connector had to be dismanteled to free the power wires for plug-and-play installation in the LED kit's driver. All in all, lot of work to make the kit fit, so patience, creativity, and extra parts are required.

2010-nissan-sentra-led-upgrade-0.jpg  

2010 Nissan Versa LED Upgrade - DRL Problem Solved!

2010 Nissan Versa had no DRL lights after upgrading to an LED kit bought on Amazon.ca. Customer came to us for resolution. Read on...

The H4 8G LED kit is the only kit that worked in this vehicle. We have tried every H4 LED kit we stock and none of them would turn ON in DRL. Installing anti-flicker decoders and/or voltage boosters had adverse effects on the whole lighting system, resulting in only one light working at a time.

Headlight LED kit used to solve the problem - H4 (9003, HB2) Hi/Lo 8G v.2 12000lm 72W CREE LED Headlight kit, cooling fan and external LED driver, 6V DRL Compatible.

Installation notes:
Easy straight forward install once we figured out what could be installed in this car. H4 OEM dust caps can be used. Anti-flicker decoders are NOT needed. Lights may flutter in DRL - this is caused by low engine idle speed. Increasing idle speed resolves the issue.

2019-mitsubishi-rvr-led-upgrade-0.jpg   2019 Mitsubishi RVR LED high beam and LED fog light upgrade.

Low beam - factory HID.
High beam - 9005 (HB3) X9 2-sided 10000lm 90W FCiP LED kit, cooling fan, external LED driver

Fogs - H11 (H8/H9) J1D 8000lm 40W LED kit with DUAL COLOR LED, fanless w/external LED driver

Installation notes:
Installation time 30 minutes. The adjustable bulb ring on the high beam 9005 had to be lubricated for ease of adjustment after installing the bulb in the headlight, It just made rotating the bulb for proper adjustment super easy. Fog can be access through the front of the car. There is a plastic pin at the top of the trim holding it in place. Remove the pin and then gently pry the plastic cover away from the bumper. There are 3 philips type screws holding the fog light in the bumper. Remove them, remove the fog light, and install the new H11 dual color LED. Re-assemble. Super easy. Just a bit of time to get it done. No error codes or lights shutting off.

2002-vw-gti-led-upgrade-small-.jpg  

2002 VW GTI 2 door hatchback

Low beam - H7 W1 Hybrid 4-in-one 36W 8000lm adjustable beam LED kit

Installation Notes:
Easy 45 min install. Passenger side is easy to get to. To access drivers side you must remove the battery. Power connectors plug straight in. No decoders are needed. Bulb adapters are not needed because the bulbs are held in place with a wire clip. 2.5cm long fan fits directly under the dust cap without modification.

 2003-dodge-ram-1500-led-upgrade-sm.jpg  

2003 Dodge RAM 1500

Headlights - 9007 X7 14000lm 90W CANBUS LED kit

Installation notes:
Easy 30 minute install. Remove headlights, install LED bulbs, plug into factory harness, re-install headlights. No additional decoders were needed. The kit comes with everything you need. Headlight beam adjustment was needed after installation.

2019-land-rover-discovery-hst-sport-led-headlight-upgrade-small.jpg  

2019 Land Rover Discovery HST Sport LED Upgrade

Low beam - H7 X9 10000lm 90W non-canbus LED kit
High beam - H7 G10 10000lm 70W canbus LED kit


Installation notes:
All bulbs can be accessed through the engine compartment. Air box has to be removed on the drivers side to have access. It's easy to do with only 1 hose clamp, one rubber hose, and 1 power plug that have to be disconnected. All lights have flat rubber dust caps.

Low beam H7 is held in place with a proprietary power plug. You will need an H7 adapter to secure the H7 bulb base in the headlight. Without the adapter there is no way of securing the bulb in place.

High beam is tricky. The bulb hole is offset and there is no room for any fanned led bulbs. There is another reason too - the drivers side has a radiator overflow canister right next to the bulb, leaving no room for anything other LED style than the flexible copper ribbon cable LED bulb. New 75mm diameter rubber dust caps had to be used as the factory ones had no room for the cooling copper wires. The space around the high beam bulb is tight, so it takes some time to fit everything in. Luckily the H7 G10 LED driver is very small so it fit inside the headlight.

 jeep-wrangler-50-inch-led-bar-cover-sm.jpg   Jeep Wrangler - 50" LED bar Cover single piece. Fits curved and straight led bars.
2014-dodge-ram-led-headlight-upgrade-small.jpg  

2014 DODGE RAM LED headlight upgrade

Low beam - H11 X9 10000lm 90W LED kit
High beam - 9005 Z3 CANBUS 8000lm 48W LED kit

Installation Notes:
DIY 30 minute install. Everything fits under the round dust caps. No drilling, no decoders. Headlights have to be removed for the install. Only the Z3 LED kit can be used in the high beams due to space restriction under the dust caps.

2012-kia-optima-high-beam-and-fog-light-led-upgrade-small.jpg  

2012 KIA OPTIMA LED Upgrade

Low beam - factory HID
High beam - H1 Z3 CANBUS 8000lm 48W LED kit
Fogs - H11 X5 6000lm 50W LED kit

Installation notes:
The back of the headlights is accessible from the engine compartment without the need of headlight removal. To gain access to the driver's side, the battery had to be removed. There is no room inside the headlights to fit even the smallest LED driver or fanned LED bulb. Therefore the only LED kit that worked was the H1 Z3 canbus kit. But, even with the smallest size Z3 LED bulbs, we had to drill a hole in the dust cap and have the led driver hang on the outside of the headlight. Decoders were not needed and the Z3 LED kit worked well even in low powered DRL setting. Fogs were easy to get to from underneath the bumper. Two push-in retainers have to be removed to gain access. H11 X5 bulbs had to be adjusted because the LEDs were not aligned properly when installed in the fog light. About 2 hrs of work went into this upgrade.

2008-gmc-sierra-2500hd-low-beam-h11-led-upgrade-sm.jpg  

2008 GMC Sierra 2500HD LED Upgrade

Low beam - H11 Mi2 6000lm 50W, all-in-one LED kit

Installation notes:
Headlights do not need to be removed. With patience you can install the led bulb on driver's side. On the passenger side, the air box has to come out, to gain access to the back of the headlight. Install time approximately 30 minutes.

 

tri-row-led-bar-installed-on-a-dodge-ram-sm.jpg  

2003 DODGE RAM 3500 LED UPGRADE

26" Tri-row LED bar w/relay

2007-chevy-silverado-classic.jpg  

2007 CHEVY Silverado Classic

9006 low beam - 8G 72W 12000lm CREE LED kit with external LED driver
9005 high beam - 5S+ 45W 8000lm LED kit, fanless with blue aluminum ribbon cables and external LED driver

Installation notes:
There are virtually 2cm of space at the back of these headlights to fit an LED bulb into. High beam fit fine, but for the low beam to fit, a part of the plastci cover behind the headlight had to be removed. Install time - 1hr. Decoders were not required.

2015-ford-mustang-hid-low-beam-35w-with-decoders-sm.jpg  

2015 FORD Mustang

Low beam - H11 35W 6000K HID kit with 35W canbus pro ballasts and super decoders.

Installation notes:
These are after-market headlights with H11 bulbs instead of H13. H11 decoders were needed. Without them the lights flashed every 5 seconds. With ASIC canbus ballasts the lights turned off completely after 3-5 seconds of the vehicle running. Install time - 1.2hrs

2012-honda-civic-low-beam-led-upgrade-sm.jpg  

2012 Honda Civic

Low beam - H11 X7 CANBUS 14000lm 90W LED kit

Installation notes:
Super easy 10 min install. Both headlight bulbs can be easily accessed from the engine compartment without having to remove anything. Anti-flicker decoders are not needed. 

2012-dodge-ram-3500-led-upgrade-sm.jpg  

2013 Dodge RAM 3500

Low beam - H11 X7 CANBUS 14000lm 90W LED kit
High beam - 9005 G10 CANBUS 10000lm 70W LED kit

Installation notes:
Easy 30-40 min install. Headlights need to be removed. Low beam has enough room to fit the X7 led driver inside the headlight and enough room under the dust cap for the H11 X7 bulb to fit easily. High beam is super tight and nothing else except ribbon cable G10 or Z3 will fit.

2012-dodge-ram-3500-led-bar-install-sm.jpg  

2013 Dodge RAM 3500

32" Curved, dual color, LED bar with remote control install. Mounted inside the front bumper. Tow hooks had to be ground a bit for the led bar to fit. L-shaped steel brackets were used for mounting under the tow hook bolt and led bar. 

2014-dodge-ram-9012-led-upgrade-sm.jpg  

2014 DODGE RAM LED Upgrade

Low beam - 9012 G10 10000lm 70W LED kit - full adjustable beam, canbus compatible, fits directly under the dust cap.

Installation notes:
Super easy 30min install. Everything fits under the dust cap without any modification. Decoders are not needed with the G10 kit.

2012-mazda-3-led-upgrade-sm.jpg  

2012 Mazda 3 LED low beam upgrade

Low beam - H7 R1T 16000lm 80W

Installation notes:
1hr install. Back of the headlights are hard to get to, especially on the passenger side. New Z2 rubber dust caps were used. H7 bulb adapters were used and had to be modified in length to fit the LED bulb. 

2011-dodge-ram-3500-led-upgrade-sm.jpg  

2011 Dodge RAM 3500 LED upgrade

H13 Hi/Lo GT 18000lm 90W CREE LED kit

Installation notes:
Easy install. Lots of room behind the headlights for the bulbs to fit in. Slight flickering in DRL and ON, so we decided to use H13 canbus anti-flicker decoders.

2004-toyota-echo-h4-led-headlight-upgrade-sm.jpg  

2004 Toyota Echo

Low and high beam - H4 (9003, HB2) X6 8000LM 60W CSP LED kit w/cooling fan and external EMC LED driver

Installation notes:
Easy 10 minute install. Light flickered little bit in DRL mode so we installed H4 anti-flicker decoders to resolve that problem. 

 2016-dodge-challenger-9012-hid-kit-installation.jpg  

2016 Dodge Challenger

Low/High Beam - 9012 35W 6000K ASIC canbus HID kit

Installation notes:
1hr install. Both headlights are accessible from the engine compartment. Driver's side air box was removed for easier access. Holes had to be drilled in the dust caps for HID wires to run through to the ballasts. Ballasts were mounted on the frame just underneath the headlights. No flickering no shutting off. No relays or extra parts were needed.

2018-huyndai-elantra-9005-low-beam-u9-led-kit-sm.jpg  

2018 HYUNDAI ELANTRA

Low beam - 9005 U9 1000W 16000lm LED kit with adjustable beam and an external LED driver.

Installation Notes:
Both sides are relatively easy to get to from the engine compartment. There is only about 2.5-3cm available under the dust cap, so the U9 LED kit was the perfect candidate for the install.

 2011-honda-fit-led-headlight-upgrade-h4-hi-lo-x9-series-led-sm.jpg  

 2011 HONDA FIT

Low/High beam - H4 (9003, HB2) X9 H/L 2-sided 20000lm 90W FCiP LED kit, cooling fan, external LED driver

Installation notes:
10 minute install. Both lights are easy to get to and use simple metal wire clips to secure the LED bulbs in the headlights. no flickering in DRL. Decoders are not needed.

2020-dodge-ram-1500-classic-h11-led-headlight-and-9006-fog-light-upgrade-sm-2.jpg  
2020 DODGE RAM 1500 CLASSIC
 
H11 low beams - H11 X9S 110W 20,000lm canbus LED kit
9006 vertical fogs - 9006 J1D 40W 8,000lm fanless LED kit
Installation notes:
DIY 45min. Low beams have lots of room under the dust caps to fit any LED kit. Anti-flicker decoders are NOT needed. Easy access to both sides with headlights removed. Fogs are easily accessible also. The driver's side LED bulb always needs adjustment because the fog light bulb gets inserted on a different angle than the passenger side.
2020-dodge-ram-1500-classic-h11-led-headlight-and-9006-fog-light-upgrade-sm-1.jpg    2020 DODGE RAM 1500 CLASSIC
 
2018-dodge-ram-1500-led-headlight-and-fog-light-upgrade-sm-1.jpg  

2018 DODGE RAM 1500

Low beam - 9005 G10 70W 10,000lm LED kit. This is the only LED kit that will fit under the dust caps. Anti-flicker decoders were not needed.

Installation notes: 
Remove headlights, remove dust covers, install G10 LED kit and LED driver under the dust cap. No modification is required to the dust caps.

 
2018-dodge-ram-1500-led-headlight-and-fog-light-upgrade-sm-2.jpg  

2018 DODGE RAM 1500

Fog lights - 9006 J1D 40W 8,000lm fanless LED kit.

2017-gmc-silverado-3500-high-country-led-headlights-and-fog-lights-sm.jpg  

2017 GMC Silverado 3500 High Country

Low beam - H11 U9 100W 16000lm CANBUS LED kit
Fogs - H16 V10P LED kit

Installation Notes:
Low beams -> The driver side low beam is easy to get to. To get to the passenger side low beam you have to remove the airbox. H11 U9 LED bulbs fit directly under the dust caps which can then be re-installed without any modification. Anti-flicker decoders were not needed. Simple plug-n-play install.
 
Fogs -> it is easier to remove 3 hex screws in the wheel liner and reach in through there then it is to squeeze your hand between the frame and the fog light. The passenger side has a plastic insert under the wheel liner and around the fog lamp which if removed makes the install much easier. It is held in place by two 10mm bolts. Total install time 1 hr.
2020-toyota-4runner-trd-led-headlight-upgrade-sm.jpg  

2020 TOYOTA 4RUNNER

Low beam - H11 X9S CANBUS 20000lm 110W LED kit. These LED bulbs are 16x brighter than the OEM H11 halogen bulbs.

Installation notes:
Super easy install. Lots of room under the dust caps. Easy access from the engine compartment. 

2017-chevy-silverado-1500-hid-35w-d5s-upgrade-sm.jpg  

2017 GMC Silverado 1500

Low/High beam - D5S 35W 6000K upgrade from 25W OEM

Installation Notes:
Super easy install. The driver's side requires nothing more than the dust cap removal and bulb replacement. To release the bulb you need to reach behind the right side of the bulb and move a level up (counter-clockwise). The bulb then slides directly out of the headlight - don't twist it or tilt it. The passenger side requires that the airbox is removed, and the bulb release is located behind the left side of the bulb - move the release down (counter-clockwise) to release the bulb and up (clockwise) to secure it in place after replacement. DIY time - 20-30 minutes.
2018-kia-optima-9005-55w-asic-low-beam-hid-kit-upgrade-sm.jpg  
2018 KIA OPTIMA
 
 
Installation Notes:
DIY time: 40min. A few small parts obstructing the headlight access had to be removed. 1" holes had to be created in the dust caps to run the power wires out to the ballast. Anti-flicker decoders were not needed with this HID kit. Simple and straight forward installation.
2007-chevy-express-5x7-led-headlight-upgrade-sm.jpg  
2007 Chevy Express 
 
LED Headlight Upgrade - 105W DOT SAE 5x7 High/Low beam
 
Installation notes:
The plastic grille has to be removed to get the headlights brackets and headlights out. There are 2 bolts on top of the grille and 1 on each side of the grille under the signal/marker lamps that have to come out. Once the grille is partially out, remove the chrome headlight bracket (4 screws holding it in), unplug the H4 headlight connector and remove the old headlight. DIY - 30-45min.
2016-f350-h13-55w-hid-headlight-upgrade-sm.jpg  
 
Installation notes:
The large grille has to come out to get to the lights. There are 4 bolts on top of the grille to be removed and 5 tabs to be pushed down before the grille can be removed. The headlights are held in place with 3 bolts, 2 on the grille side, and 1 under the light closest to the fender. There is lots of room at the back of the headlights. Ballasts can be mounted on the frame on the radiator side. DIY - easy 30 min.
2001-jeep-grand-cherokee-led-headlight-upgrade-sm.jpg  
2001 JEEP GRAND CHEROKEE LED HEADLIGHT UPGRADE
 
 
 
Installation notes:
Super easy install. DIY 15-30 min. Remove 7mm bolt at the top of the headlight. Remove headlight. Remove halogen bulbs. Install LED bulbs. DRL is the low beam headlight bulb. DRLs flicker in AUTO mode. Adding anti-flicker canbus decoders resolves the flickering issue in DRL mode.
2016-ford-f150-led-headlight-and-fog-light-upgrade-sm.jpg  
2016 Ford F150
 
H11 low beam - H11 G10 LED series with copper wire cooling, fanless, 70W 10000lm.
 
9005 high beam - 9005 G10 LED series with copper wire cooling, fanless, 70W 10000lm.
 
9145 fogs - 9145 (9005, H10) V12X Series 8000lm 30W
 
Installation notes: This is not a fun job at all. It takes about 1.5-1.75 hrs to install the low, high, and fogs, including LED alignment. The only access to the bulbs is through the wheel wells. Access space is very limited. Dust caps are very shallow and the space under them does not allow for any LED kits with fans to be installed without getting deeper rubber dust caps. That is why the G10 LED series is the best for this job. The G10 LED bulbs fit under the OE dust caps without any modification or additional parts. Anti-flicker canbus decoders are NOT needed with the G10.
2003-chevy-tracker-h4-led-upgrade-sm.jpg  
2003 CHEVY TRACKER
 
H4 hi/low beam - H4 X9 90W 20000lm
 
Installation notes: Super easy install. Easy access to both lights from the engine compartment. Unplug and remove H4 halogen bulb, install H4 LED. DIY 10 minutes.
volvo-semi-truck-headlight-re-wire-job-and-led-upgrade-sm.jpg  

VOLVO semi-truck

VOLVO semi-truck headlight re-wire, upgrade low beams to 55W HID ballasts with D2S HID bulbs in a projector, and 9005 LED high beams.
 
Installation notes: The truck's computer is super picky. With halogens used in high beams, the computer would shut off both low and high beam when the high beam was activated. By using low wattage 9005 (H10) LEDs we were able to satisfy the computer and keep both high and low beams on at the same time.
 
2020-toyota-tacoma-led-headlight-and-fog-light-upgrade-sm.jpg  
2020 TOYOTA TACOMA
 
H11 low beam - H11 X9 90W 20000lm
H11 fogs - H11 V10P 30W 8000lm 
 
Installation notes: Super easy and quick install. All bulbs can be accessed through the engine compartment. There are no dust caps to deal with. Anti-flicker decoders are not needed on any of the lights. Vertical LED alignment in the projector low beam produced the best light pattern and intensity.
2014-toyota-tacome-led-headlight-upgrade-hid-vision-canada-sm.jpg  

2014 TOYOTA TACOMA

H4 (9003) low/high beam - H4 X9S 110W 20000lm

Installation notes: Super quick and easy install. The passenger side water reservoir had to be moved out of the way to gain easy access to the back of the headlight. The battery on the driver's side had to also be moved slightly for the same reason. The rubber boots on the back of the headlights had to be trimmed by 1cm so the bulbs could lock in the headlight. Factory power connectors connect directly to the LED bulb's power connectors. Anti-flicker canbus decoders are not needed.

honda-crv-sm.jpg  
HONDA CR-V
 
H4 low/high beam - H4 X9 90W 20000lm
 
Installation notes: Super easy install. LED bulbs slide through the rubber boot without any modification. Anti-flicker decoders are not needed. LEDs connect directly into the H4 factory headlight connectors.
2003-toyota-tacome-h4-9003-led-headlight-upgrade-sm.jpg  

2003 TOYOTA TACOMA

H4 (9003) low/high beam - H4 X9S 110W 20000lm

Installation notes:
Super easy install. The windshield washer fluid reservoir on the passenger side needs to be moved to gain easier access to the back of the headlight. Rubber boots have to be trimmed by 1cm to allow for the LED bulbs to lock in the headlight. Other than that it is straight forward. H4 factory headlight connectors plug directly into the LED's H4 connector. Anti-flicker canbus decoders are not needed.
2019-mitsubishi-outlander-led-headlight-low-beam-h7-upgrade-sm.jpg  
2019 MITSUBISHI OUTLANDER
 
H7 low beam - H7 X9 90W 20000lm
 
Installation notes: The headlights on this vehicle are quite deep. You have to slide your whole hand inside the headlight opening to reach the bulb. To unlock the bulb, hold the retaining clip and rotate the bulb counterclockwise. When installing the LED with the new adapter, first lock in the headlight and then while pushing toward the front of the headlight with substantial force, rotate the bulb so the LED bulb's power wire is directly at 6 o'clock. This aligns the LEDs vertically. We've tried aligning the LEDs horizontally in the headlight, but the vertical alignment yielded a much better light pattern from this projector headlight.
2018-toyota-4runner-led-headlight-and-fog-light-upgrade-sm.jpg  
2018 TOYOTA 4RUNNER
 
 
Installation notes:
Easy access to both low beams and fogs. Low beams don't have much room inside the headlight and under the dust caps to fit large led drivers into (ex. F6 LED drivers will not fit), but will accommodate most led bulbs even with larger fans. Low beams have to be aligned to provide the proper beam. Passenger side fog has very little room around it because of the metal that surrounds it.
2015-hyundai-genesis-d1s-hid-replacement-sm.jpg  
2015 Hyundai Genesis
 
OEM D1S 35W 4300K HID bulbs were replaced with D1S 35W 6000K.
 
Installation notes:
DIY 4hrs. The bumper cover needs to be removed as do the headlights. Photo supplied by our customer.
2018-honda-hr-v-led-headlight-and-fog-light-upgrade-sm.jpg  
2018 Honda HR-V LED headlight and fog light upgrade
 
Low/High beam - H4 X9S 110W 20000lm
 
Installation notes:
Easy install. Headlights are accessible from the engine compartment without removing anything. Rubber dust boot had to be trimmed a bit in length to lock the led bulb in the headlight.
 
2008-suzuki-grand-vitara-led-upgrade-sm.jpg  
2008 SUZUKI GRAND VITARA
 
Installation notes:
Low and high beams can easily be accessed through the engine compartment. H7 low beams need Q24 spacer adapters. The OEM H7 uses an H4 power plug which puts the connectors too far apart to directly plug the H7 LED connector into it. The connector has to be cut off and new female spade connectors need to be installed. This slows down the upgrade installation but there is no other way of doing it. The rubber boot is also for H4 bulbs and the inner circle opening has to be trimmed by 1 cm in length for the LED bulbs to lock in the headlight. High beam 9005's install just like any other bulb - twist, turn, connect the power cable. Fogs need to have the wheel well liner moved for easy access to the fog lamps. Just 2 snap tabs have to be removed to get in. S1D LED kits is also a direct plug-n-play install. No error codes, no anti-flicker devices were needed. Daytime running lights are the low beams and they operate at full 12V. Install time - 1.5hrs
2018-mitsubishi-lancer-ralliart-led-headlight-and-fog-light-upgrade-sm.jpg  
2018 MITSUBISHI LANCER RALLIART
 
Low beam - D2S HID 35W 6000K 
Fogs - H11 S1D 40W 9000lm dual color
 
 
Installation notes:
D4S is directly swappable for D2S in terms of fitment but not functionality. When we used the D4S 35W 6000K bulbs they turned purple color and the car shut them off after about 30-45 seconds. We had to use D2 series HIDs for the lights to stay on. Likely this was due to the lower power draw of the more efficient D4 bulbs. The D2 bulbs are held in place with a wire clip. Both headlights can be accessed through the engine compartment. On the passenger side the radiator overflow has to be moved out of the way before you can get to the low beam. On the driver's side, an electrical box has to be moved out of the way to gain access to the back of the low beams. When installing the HID bulbs, the return wire has to be at the bottom. DIY time about 30 minutes.
Fogs - the cowling around the front of the fogs is held in place by one philips screw at the top corner nearest the grille. Once removed the housing is exposed and it is held in place by 3 philips screws. Once removed from the car, the new LED kit could be easily installed. DYI time about 15 minutes.
2016-dodge-ram-1500-led-headlight-upgrade-sm.jpg  
2016 DODGE RAM 1500
 
Low beam - 9005 U9 LED Series 100W 16000lm
+ low beam anti-flicker decoders 
High beam - 9005 U9 LED Series 100W 16000lm
 
Installation notes:
Standard RAM install. This one had a set of small screws just next to the lights holding the grille in place. Both high and low beam 9005 U9 LEDs fit perfectly under the dust cap without any modification. Anti-flicker decoders were not needed for the high beam but the low beams do need them. DIY time: 45 min
2008-dodge-ram-1500-led-headlight-upgrade-sm.jpg  

2008 DODGE RAM 1500

Low/High beam - H13 X9S 110W 20000lm LED kit + H13 2nd Gen anti-flicker canbus decoders

Installation Notes:
This is a normal RAM install. 2 bolts on the side of the headlight next to the radiator and one at the back of the headlight through the wheel well were removed before the headlight could come out. There are no dust caps to deal with and there is plenty of room for mounting everything. The small LED drivers were attached to the headlight itself and the decoders were mounted on the frame.

2011-ford-f150-led-headlight-upgrade-sm.jpg  
2011 FORD F150 LED HEADLIGHT UPGRADE
 
 
Installation notes: 3 screws holding the headlight had to be removed - 2 on top and 1 on the side closest to the radiator. Once the headlights were out the halogen bulbs were removed and LED bulbs installed. Anti-flicker decoders are NOT needed. Easy DIY install.
2010-nissan-altima-h11-hid-low-beam-kit.jpg  

2010 NISSAN ALTIMA

H11 35W 6000K HID kit

Installation notes: Contrary to what most installers say, the bumper does NOT have to be removed on this vehicle for you to be able to install HIDs or LEDs. There are 2 philips screws on the bottom of the bumper and 1 snap tab in the wheel well on each side of the vehicle that need to be removed for the wheel well lining to be moved to the side so you can reach the low beam bulbs.

 2001-dodge-ram-2500-led-upgrade-low-beam-high-beam-fogs-sm.jpg  

2001 DODGE RAM 2500

9007 V10P low beam LED + anti-flicker decoders
9004 V10P high beam LED
880 J1D dual color fog LED

Installation notes: 
The complete install including the new headlights took 2 hrs. There was nothing difficult about it, it just took time. The bumper DOES NOT have to come off. The side signal lights have to come off for easy removal and installation of the headlights. All connections to the low and high beams can be reaches from the engine compartment.

2017-dodge-grand-caravan-led-upgrade-sm.jpg  
2017 DODGE GRAND CARAVAN
 
 
INSTALLATION NOTES:
DIY 1hr install. Easy access from the engine compartment to both low and high beams. Anti-flicker decoders were not needed for either low or high beam. DRL voltage is 8.7V. F6 Series LEDs work fine in DRL mode without flickering. LED alignment was not necessary as both sets aligned perfectly straight out of the box.
2020-dodge-ram-3500-h11-low-beam-9005-high-beam-q3-led-sm.jpg  
2020 DODGE RAM 3500
 
Low beam - H11 Q3 LED kit - 1:1 LED to Halogen bulb size. Canbus compatible LED bulbs with adjustable beam. 100% plug-n-play without any modifications to wiring or dust caps.
High beam - 9005 Q3 LED kit - 1:1 LED to Halogen bulb size. Canbus compatible LED bulbs with adjustable beam. 100% plug-n-play without any modifications to wiring or dust caps.
 
Installation Notes:
Low beams bulbs are accessed through the wheel wells. Super easy install. High beams are accessed through the engine compartment. The driver's side is easy to get to. The passenger side access is limited by the airbox, so removing it makes the installation much faster and easier. DIY time 30 minutes.
2005-ford-excursion-9007-led-headlight-upgrade-sm.jpg  
2005 FORD EXCURSION LED HEADLIGHT UPGRADE
 
Low/High beam - 9007 V10P 6V DRL compatible LED series was the perfect fit because of the LED power cable leading out the center of the back of the LED bulb. Due to the retaining ring being very long, it was impossible to install any other LED kit with a power cable vertically down from the bottom of the LED bulb without modifying the OE retaining ring.
 
Installation Notes:
DIY time - 10 minutes. Both sides are easily accessible just by reaching behind the headlight from the engine compartment. Anti-flicker decoders are not needed.
2014-dodge-ram-3500-9012-low-beam-9005-fogs-q3-led-upgrade-sm.jpg  
2014 Dodge RAM 3500 LED Headlight and Fog Light Upgrade
 
 
Installation notes:
DIY 30 minute install. All lights are super easy to install and they all plug directly into the factory harnesses. LEDs are adjustable and needed to be adjusted vertically in the low beams for the best possible light output. High beams did not need to be adjusted. Fogs were a 2 minute install.
2015-dodge-ram-1500-9012-low-beam-led-upgrade-with-anti-flicker-decoders-projector-headlight-sm.jpg  
2015 Dodge RAM 1500 LED Low Beam Upgrade
 
 
Installation notes:
Standard RAM install. Grille has to come out, headlights have to be removed. Dust caps have to be removed and the low beam 9012 halogens replaced with 9012 Q3 LED bulbs. DIY 45 min install. All headlight functions including Auto, ON, DRL, worked as expected.
2019-dodge-ram-3500-led-headlight-and-fog-light-upgrade-small.jpg  
2019 DODGE RAM 3500 FULL LED HEADLIGHT AND FOG LIGHT UPGRADE
 
Low beam - H11 Q3 LED kit
 
Installation notes:
Low beam bulbs can be accessed from the wheel wells. High beam on the driver side is easily accessed from the engine compartment. To access the passenger high beam bulb the air box needs to be removed. Fogs are easily accessible from underneath the vehicle with plenty of room to fit any LED bulb. DIY install time - 1 hr.
32-inch-564w-56400lm-curved-quad-row-cree-xbd-led-bar-installed-sm.jpg   32" 564W 56400lm CURVED Quad-Row Side Mount CREE XBD Combo Beam LED Light Bar 
2016-dodge-durango-led-headlight-and-fog-light-upgrade-sm.jpg  
2016 DODGE DURANGO LED HEADLIGHT AND FOG LIGHT UPGRADE

Headlights - 9005 Q3 canbus 12000lm LED kit. Perfect fit under the dust caps. Adjustable beam. 1:1 size.

Fogs - H11 V12X 8000lm LED kit. Non-adjustable LED diodes but they aligned perfectly in the fogs without needing any adjustment.

Installation Notes:
The dust caps are a bit tricky at first because they are different from other Dodge vehicles. They are rubber but with a plastic ring that turns clockwise to unlock. There is virtually no room under the dust caps for any LED kit with a large fan, that is why the 9005 Q3 Series was the best fit. The small LED driver easily fits inside the headlight. Accessing the headlight bulbs is done through the wheel wells, so there is no need to remove any engine covers to get to the headlights. When connecting the headlight wires you have a 50-50 chance of guessing the polarity since Dodge used black wires for both + and - The fogs are accessed from under the front of the SUV and the installation takes only a few minutes. DIY install time: 30 minutes.
2016-toyota-tundra-crewmax-1794-edition-h4-u9-led-headlight-upgrade-sm.jpg  
2016 TOYOTA TUNDRA CREWMAX 1794 EDITION
 
 
Installation Notes:
The back of the headlights can be accessed through the wheel wells. The frame is in the way, which makes it challenging to install the bulbs with the headlights in place, but not impossible. There is a metal frame not too far from the back of the headlights on both sides, so installing a larger LED bulb like the F6 or X9S is not possible without removing the headlight. For that reason, we chose to install the U9 Series LEDs. The passenger side required more work than the drivers' side because of extra plastic trim on that side. DIY time - 1 hr.

 

2006-lexus-gs300-low-beam-high-beam-drl-led-upgrade-sm.jpg  
2006 Lexus GS300 LED DRL/High Beam and LED Fog light upgrade
 
DRL/High Beam - 9005 V10 6V DRL Compatible LED kit + 2nd gen canbus anti-flicker decoders
Fogs - 9006 V10 LED kit
 
Installation Notes:
DRL/high beams are easy to get to from the engine compartment. Low beam HIDs are also super easy to access. To get to the fogs you need to remove 3 bolts from the wheel well lining and then access the bulbs through there. DIY install - 1 hr.
2015-dodge-challenger-sxt-plus-led-headlight-and-fog-light-upgrade-sm.jpg  

2015 DODGE CHALLENGER SXT PLUS

Low beam - 9012 (HIR2) Q3 CANBUS 2-sided 12000lm 72W + canbus anti-flicker decoders

Fogs - H11 LED V12X 30W 8000lm + canbus anti-flicker decoders

Interior Dome/Map LEDs - 36mm Samsung LEDs

Installation notes:
Both low beams and fogs MUST have canbus decoders installed. Without them both headlights and fog lights shut off after the engine is started. Headlights can be accessed through the engine compartment. There isn't much room but it is doable. Decoders and LED drivers fit easily inside the headlight. No modification to the dust cap is necessary. The Q3 LEDs fit directly under the dust cap. Fogs can be accessed through the wheel liner simply by removing 3 plastic tabs. All 3 tabs snapped so make sure you have extras.

2006-ford-mustang-convertible-led-headlight-and-fog-light-upgrade-sm.jpg  
2006 FORD MUSTANG CONVERTIBLE
 
Headlights - H13 H/L V1 LED kit - SOLD OUT
 
Installation Notes:
Headlights are very easy to get to from the engine compartment. To get to the fogs you must remove the small plastic cover on top of the radiator and then unhook the plastic tabs on the grille so you can remove it from the vehicle. Ensure you buy adjustable LEDs for the fogs. The bulbs lock in only one way and the bulbs must be rotated by 90 degrees so they reflect properly. Anti-flicker decoders are not needed. DIY - 30 minutes.
2019-dodge-ram-1500-eco-diesel-led-headlight-and-fog-light-upgrade-sm.jpg  
2019 DODGE RAM 1500 ECO DIESEL
 
LOW BEAM - H11 U9 100W 16000lm canbus with adjustable LED beam.
HIGH BEAM - 9005 Q3 72W 12000lm canbus with adjustable LED beam.
FOGS - 9006 S1P 40W 9600lm non-canbus and non-adjustable.
 
INSTALLATION NOTES:
Both headlights have to be removed to gain access to the bulbs. Low beams have ample room inside the headlight to fit any H11 fanned LED kit. High beams have no room under the dust cap, so the Z3 and Q3 LED kits are your best choices. Fogs are easily accessible from underneath the front bumper. DIY time: 1 hr.
2019-jeep-grand-cherokee-led-headlight-and-fog-light-upgrade-sm.jpg  
2019 JEEP GRAND CHEROKEE - LED HEADLIGHT AND FOG LIGHT UPGRADE
 
 
INSTALLATION NOTES:
The airbox on the driver's side and the radiator overflow on the passenger side have to come out to get access to the low and high beam bulbs. The low beams are UGLY to get to. The bulbs are NOT in the center of the headlight opening making it difficult to remove the bulbs as well as install the new LEDs. The high beams and fogs are super easy to do though. DIY time - 2hrs but only because the low beam H11 halogen bulbs would not come out. In this particular vehicle, we had to use a panel puller to loosen them up from the headlight. The same procedure will apply for 2019-2021 Jeep grand Cherokees.
2013-nissan-sentra-led-upgrade.jpg  
2013 NISSAN SENTRA LED HEADLIGHT UPGRADE
 
LOW BEAM - H11 X9 90W 20000lm LED kit
 
Installation notes:
Once the radiator cover is removed then each headlight can be accessed from the engine compartment. Each headlight has a hard plastic dust cap with about 3cm of space under it. Anti-flicker decoders are NOT needed. Lots of room to fit everything inside the headlight.
2021-dodge-ram-1500-led-headlight-and-fog-light-upgrade.jpg  
2021 Dodge RAM 1500 LED headlight Upgrade
 
 
INSTALLATION NOTES: IMPORTANT!
Standard RAM install. Headlights have to come out, dust caps come off, and new LEDs install under the dust caps. There is lots of room to fit any led kit in, BUT not all LED kits will work. We tried the H11 F6 carbon series and H11 U9 series, and even thought both sets worked for days, the headlights turned off close to 7 days after the install. The H11 G10 series was the only stable choice for this truck that has been working since the install.
 
2016-dodge-ram-1500-led-headlight-upgrade-small.jpg  
2016 Dodge RAM 1500 LED Headlight Upgrade
 
Installation notes:
Super easy install. Headlights have to be removed to get to the dust caps. 9005 U9 LED bulbs easily fit on the low beam side under the dust caps. 9005 U9 LED bulbs are fully adjustable. DIY 30 min install.
2011-hyundai-santafe-led-headlight-and-fog-light-upgrade-sm.jpg  
2011 Hyundai SantaFe LED headlight and fog light upgrade.
 
Installation notes:
Low beams are easily accessed from the engine compartment. Nothing has to be removed or moved to get to them. H11B X10 LED bulbs install just the same way as the H11B halogen bulbs, and they fit directly under the dust hard dust cap. DIY time about 5 min. Fogs are also easily installed by moving over the wheel well lining in the front of each wheel (no screws or tabs need to be removed) and simply reaching in and removing the halogens bulbs. DIY time about 10 min. Anti-flicker decoders are NOT needed for any of the lights.
2021-jeep-grand-cherokee-led-headlight-and-fog-light-upgrade-sm.jpg  

2021 JEEP GRAND CHEROKEE

Installation notes:
The low beams are the WORST to install out of any vehicle we've worked on. There is no room to reach into the headlight from either the top or the bottom. There are sharp plastic brackets in the way making it super difficult to remove and install the bulbs. The worst part is the halogens are so tight that you need to break the seal by prying on the bulb. The fogs are easy to replace simply by reaching in from the bottom of the SUV. Anti-flicker decoders were not needed.
2021-vw-tiguan-led-headlight-and-fog-light-upgrade-sm.jpg  
2021 VW TIGUAN - LED headlight and LED fog light upgrade.
 
 
Installation Notes:
Adjusting the bulb adapters is not fun. It is literally trial and error because you cannot see inside the headlight. Once the bulb is secured in the headlight, the LED driver fits inside the headlight, and the OEM rubber dust cover can be re-installed. Fogs are easily accessible by removing 3 torx screws from the wheel well lining, and then reaching in to remove and re-install the bulbs. There is a bulb stop on the back of the fogs, so you have to first install the bulb and then connect it to power. Anti-flicker decoders were not needed.
2014-subaru-legacy-low-beam-and-fog-light-led-upgrade-sm.jpg  
2014 SUBARU LEGACY - LED headlight and LED fog light upgrade.
 
Low beam - H7 R1 v.2 CANBUS 18000LM 90W CANBUS 360 degree LED no adjustment needed.
Fogs - H11 (H8/H9) N2-P 120W 19200lm CANBUS 360 degree LED no adjustment needed.
 
Installation Notes:
The bumper cover has to come off and the headlights need to be removed in order to get the best access to the back of the housing. Anti-flicker decoders are not needed. Bulb adapters are not needed - bulbs are held in place with a simple wire clip. DIY time: approx. 1 hr
2008-nissan-altima-h11-led-fog-lights-h11-hid-low-beam-sm.jpg  
2008 NISSAN ALTIMA 2 DOOR - HID BULB REPLACEMENT and LED fog light upgrade
 
 
Installation Notes:
Both low beam and fog light bulbs are accessed through the wheel wells. There is plenty of room for easy access to both. 
 
NOTE: 
High beam bulbs require non-polarity LEDs to work in high beam and DRL mode. High beam bulbs are somewhat difficult to reach but with removal of a few things in and around the back of the headlights inside the engine compartment, they can be reached.
2017-chevy-silverado-3500-hid-low-beam-led-high-beam-upgrade-sm.jpg  
2017 CHEVY SILVERADO 3500 HID & LED headlight Upgrade
 
 
Installation Notes:
DIY 45-60 min. Passenger side air box has to come out to get access to the bulbs. HID bulbs and ballasts fit into the headlight, so no dust cap drilling is required. LEDs fit directly under the dust caps without any modification. No dash error codes following the upgrade. No flickering.
2009-ford-f350-led-headlight-and-fog-lights-sm.jpg  
2009 FORD F350 LED headlight and Fog light upgrade.
 
 
Installation notes:
All 4 bulbs can be easily accessed just by reaching behind the headlight or fog light. DIY time about 15 minutes. DRLs work as expected with the H13 X9 LED kit.
2015-ford-fiesta-h11-low-beam-led-upgrade-sm.jpg  
2015 FORD FIESTA - LED HEADLIGHT UPGRADE
 
 
Anti-flicker decoders are not needed. DRLs work as expected.
 
Installation Notes:
There is very little space to take the halogen bulbs out and install the LEDs. What complicates the install is that the headlight bulb power cables are short and the location of the bulbs is offset (not centered in the opening at the back of the headlight). To make the job much easier, remove the 2 bolts holding the headlight in place and move the headlight upwards to gain access to the opening. DIY - 20 minutes.
2014-dodge-grand-caravan-h11-led-low-beam-w-anti-flicker-decoders-sm.jpg  
2014 Dodge Grand Caravan LED Headlight Upgrade
 
 
H11 2nd Gen anti-flicker decoders were needed as there was a very slight pulse detected in the light about every 4 seconds.
 
Installation Notes:
Super easy install. You can reach the low beam bulbs from the engine compartment without having to remove a single part. DIY time about 15 minutes.
2011-ford-f350-superduty-led-headlight-and-led-fog-light-upgrade-sm.jpg  
2011 FORD F350 SUPERDUTY LED headlight and LED fog light upgrade.
 
 
Installation Notes:
The large grille has to be removed to get to the headlight bolts. With the 3 headlight bolts removed, the headlight assembly tilts forward giving you access to the back of the headlight. Installation is simple - remove the H13 halogen bulb, install the new H13 X9S LED bulb, connect the H13 headlight power connector, and re-assemble. Anti-flicker decoders are NOT needed. Daytime running lights work at reduced power, same as before the upgrade.
Fogs are super simple to install. Just reach under the bumper, disconnect the power cable, remove the halogen bulb, connect the LED bulb to the power cable, and install the new LED in the fog lamp.
DIY time for headlights and fogs - 1hr.

2019-dodge-ram-1500-classic-h11-hid-low-beam-9006-dual-color-fogs-sm-1.jpg

 
2019 DODGE RAM 1500 CLASSIC
 
Fogs - 9006 J1D dual color LED kit - white and yellow on demand
 
Installation Notes:
9005 relay had to be installed so the lights would work in AUTO mode. Without the relay the HID lights flickered because they were not getting enough power.
2011-infiniti-qx56-led-n2-p-fog-lamp-upgrade-sm.jpg  
2011 Infiniti QX56 LED Fog Light Upgrade
 
The fogs on the QX56 work as daytime running lights, so they are ON all the time until the headlights are turned on.
 
 
Installation Notes:
Super easy upgrade. Just reach under the bumper, remove the old halogen bulb, and install the new LED. The N2-P LEDs are extremely bright, so expect a massive difference in light output.
2012-dodge-ram-3500-led-headlight-upgrade-sm.jpg  
2012 DODGE RAM 3500
 
HIGH BEAM - 9005 (HB3) Q3
FOGS - H10 VX
 
Installation Notes:
DIY 30 minute install. Headlights have to be removed. H11 low beam anti-flicker decoder fits inside the headlight. High beam 9005 Q3 fits perfectly under the dust cap. Both low and high beam LEDs needed LED alignment after installation. Fogs can be accessed just by reaching under the bumper.
 
2019-dodge-ram-1500-led-headlight-upgrade-sm.jpg  
2019 DODGE RAM 1500
 
Low beam - H11 X9S
 
Installation notes:
Super easy standard Dodge RAM install. Remove headlight, remove halogen bulb, install LED. Everything fits directly under the dust cap.
2011-nissan-nv2500-hd-h13-led-upgrade-sm.jpg  
2011 Nissan NV2500 HD
 
 
Installation Notes:
Easy access to both H13 bulbs just by reaching behind the headlight from the engine compartment.
2014-dodge-ram-1500-led-upgrade-sm.jpg  
2014 DODGE RAM 1500
 
 
Installation Notes:
Super easy install. Grille and lights have to come out. Dust cap covers both low and high beam bulbs. Low beam has no extra space for any other LED kit series other than the Q3 or Z3. High beam is offset providing very little space for installing the 9005 LED bulb.
2001-gmc-silverado-9006-9005-f6-led-upgrade-sm.jpg  
2001 GMC Silverado
 
 
INSTALLATION NOTES:
Super easy install. Headlights have to be removed by un-clipping the 2 slide-in pins on top of each headlight. F6 LED bulbs fit easily into the space available. LED drivers for both low and high beams fit on the back of each headlight between the low and high beam.
2012-dodge-ram-1500-quad-cab-h13-led-headlights-sm.jpg  

2012 DODGE RAM 1500 QUAD CAB

HEADLIGHT - H13 H/L V10P 8000LM 32W PLUG-N-PLAY LED KIT

INSTALLATION NOTES:
Standard Dodge RAM install. The grille has to come off, headlights have to come out, halogen bulbs have to be removed and new LED bulbs installed. Pay close attention to the location of LED chips when installing the LED bulbs. See photos for an explanation on how to align the LEDs so you have a proper high and low beam. Resistors or anti-flicker decoders were not needed. The headlights worked well in DRL, AUTO, and ON modes.

2013-m1100-turbo-arctic-cat-sled-sm.jpg  
2013 ARCTIC CAT M1100 TURBO SLED
 
LED HEADLIGHT kit - H4 X9S 110W 20000lm
2008-dodge-ram-1500-led-upgrade-sm.jpg  
2008 DODGE RAM 1500
 
H13 LOW AND HIGH BEAM - 55W canbus HID kit w/relay1pc anti-flicker decoder and 2pcs dual 50W resistors are needed for the install
 
9006 FOGS - 55W canbus HID kit
 
2022-dodge-ram-3500-led-upgrade-sm.jpg  
2022 DODGE RAM 3500 LED Low and High beam Upgrade
 
2015-jeep-cherokee-9012-n2-p-low-beam-h16-s5-fogs.jpg  

2015 JEEP CHEROKEE LED headlight and Fog light upgrade

Low beam - 9012 N2-P 120W 19200lm

Fogs - H16 S5 50W 10000lm

INSTALLATION NOTES:
To get to the low beams and fogs you first have to undo two 5/16 bolts from the wheel well lining. Low beam have a dust cap but there is plenty of space under it to fit any 9012 LED kit. Fogs were easy to do but the one small tab on the H16 LED bulb had to be removed to fit the housing.

 

2008-chevy-silverado-1500-h11-u9-low-beam-h16-hid-fogs.jpg  
2008 CHEVROLET SILVERADO 1500 LED low beam and HID Fogs upgrade
 
LOW BEAM - H11 U9 Series LED 16000lm 100W canbus
 
Fogs - H16 35W 10000K ASIC canbus HID kit
 
INSTALLATION NOTES:
Driver side low beam is easy to get to. Passenger side needs the air box removed to get to the low beams. Fogs are super easy to get to. However, installing HIDs required that a new connection is made between the vehicle and the HID ballast. Installation time: about 1.5hrs.
2017-chevrolet-silverado-3500-h11-n2-p-low-beam.jpg  
2017 Chevrolet Silverado 3500 - LED low beam upgrade.
 
Low beam - H11 N2-P 120W 19200lm LED kit. Anti-flicker decoders are not needed.
 2014-hyundai-santafe-h11-low-beam.jpg  
2014 HYUNDAI SANTAFE - LED LOW BEAM AND LED FOG LIGHT UPGRADE
 
Low Beam - H11B halogen bulbs were replaced with H11 F10 110W 20000lm LED bulbs designed for projector headlights.
Fogs - H11 halogen bulbs was replaced with H11 U9 100W 16000lm LED bulbs.
High beams - are also the daytime running lights. They were not replaced.
 
INSTALLATION NOTES:
Low beams required quite a bit of work. An H11 to H11B adapter had to be created. The back of the headlight where the bulb ring locks into had to be removed, then the LED bulb ring fitted in, and then the two pieces had to be re-installed in the headlight before the LED bulb could be installed. See photos. Fogs are accessible through the wheel wells and they're not too bad to install. Anti-flicker decoders were not needed in low beams or fogs. Installation time: 1.5 hrs.
2017-f150-ford-f150-led-headlight-upgrade.jpg  
2017 FORD F150 LED headlight upgrade
 
INSTALLATION NOTES:
Both low and high beams are accessed through the wheel wells. There are four 7/16" bolts and 1 plastic snap that have to be removed first to free the lining. Q3 LEDs fit directly under the rubber dust caps. Anti-flicker decoders are not needed. Both H11 and 9005 are 100% plug-n-play. Install time - 45 minutes.
2006-ford-f150-h13-9008-led-headlight-upgrade.jpg  

2006 FORD F150

H13 (9008) H/L LED Upgrade - H13 F5 20000lm 110W canbus LED kit

INSTALLATION NOTES:
Headlights have to be removed from the truck to gain access to the bulbs. There are only 3 bolts holding them in the truck. Once out, H13 LED bulb installs the same as a halogen bulb. Install time - 30 minutes 

Anti-flicker decoders are NOT needed. 
6V LED kit is NOT needed. 8V min operates fine.

2008-chevy-silverado-2500-9005-9006-led-low-beam-and-high-beam-upgrade.jpg  

2008 CHEVY SILVERADO 2500

Low beam - 9006 X9S 20000lm 110W LED kit
High beam - 9005 X9S 20000lm 110W LED kit

2011-mazda-tribute-h13-led-headlight-upgrade-sm.jpg  

2011 MAZDA TRIBUTE

Low/High Beam - H13 (9008) H/L V10P 6V DRL Compatible 8000lm 36W fanless LED headlight kit

INSTALLATION NOTES:
Straight forward install. Easy access to the bulbs from the engine compartment. LEDs had to be aligned (rotated) to reflect properly.
 2012-dodge-ram-1500-led-headlight-and-fog-light-upgrade.jpg  

2011 DODGE RAM 150

Low beam - H1, Q3, 72W 12000lm
High beam - 9005 A5 80W 16000lm
Fogs - H10 VX 16000lm

INSTALLATION NOTES:
These are after-market headlights NOT OEM. There is absolutely NO room inside the headlights to fit any size decoders or LED drivers into. We had to install them on the backside of the headlights, so a bit of wiring was required to make it happen. High beams are also DRLs, and contrary to all other 2012's these needed anti-flicker decoders, so they would not flicker in DRL mode.

 

2011-dodge-ram-3500-h13-led-headlight-upgrade.jpg  

2011 DODGE RAM 3500

H13 HI/LO - H13 (9008) V10P LED headlight kit.

INSTALLATION NOTES:
Standard RAM install. H13 anti-flicker decoder were needed.

2007-buick-allure-led-headlight-upgrade.jpg  

2007 BUICK ALLURE 

Low beam - H11 U9 100W 16000lm LED
High beam - H11 U9 100W 16000lm LED

INSTALLATION NOTES:
H11 U9 LED bulbs fit directly under the dust caps. Anti-flicker decoders are NOT needed. Low beam/DRL works as intended with the H11 U9 bulbs. Install time about 20 minutes.

 2016-nissan-frontier-9007-led-headlight-upgrade-sm.jpg  

2016 NISSAN FRONTIER

HI/LO/DRL - 9007 V10 LED kit

DRL - High beams
DRL Voltage - 12V
 
IMPORTANT:
Nissan swaps polarity between DRL and High Beams, so it is rare to find an LED kit that will work in both settings. The 9007 V10P LED kit handles polarity swapping well and the LED bulbs work in both DRL and high beams.
 
INSTALLATION NOTES:
Super easy install. Both bulbs are accessible from the engine compartment. DIY 15-20 minutes.
2022-dodge-ram-3500-led-headlight-and-fog-light-upgrade-sm.jpg  

2022 RAM 3500 LED Headlight and Fog light Upgrade

Low beam - H11 GTS PRO 120W 24000lm canbus LED kit
High beam - 9005 V10 30W 9600lm
Fogs - H11 V10 30W 9600lm LED kit
 
INSTALLATION NOTES:
Both low beam sides can be reached in easily from the engine compartment. Fogs are easy to get to from underneath the vehicle. High beam on the passenger side requires the removal of the air box. 
2016-hyundai-santafe-h11b-led-headlight-upgrade-sm.jpg  
2016 Hyundai SantaFe LED Headlight Upgrade
 
Low beam - H11B X10 LED Series60W 12000lm
 
INSTALLATION NOTES:
An orange o-ring was used to replace the blue H11 o-ring so the connectors on the led bulb lined up better with the OEM headlight power connector attached to the back of the headlight. These o-rings are supplied automatically with the H11B kit.
2016-jeep-grand-cherokee-led-headlight-and-fog-light-upgrade-sm.jpg  
2016 JEEP Grand Cherokee LED Headlight and Fog Light Upgrade
 
Low beam - Low beam - H11 GTS PRO 120W 24000lm canbus LED kit
Fogs - H11 V10 30W 9600lm LED kit
 
INSTALLATION NOTES: 
The space is tight, but with patience both low beam sides can be installed without having to remove any other parts. To get to the fogs, remove a small part of the protective plastic in the bumper directly under the fogs. There are 4 screws holding it in place.
2016-mazda-cx5-led-headlight-and-fog-light-upgrade-small.jpg  
2016 Mazda CX5 LED Upgrade

Low beam - H11 U9 LED Series 100W 16000lm
 
High beam (6V DRL) - 9005 V10 LED recommended but were not installed
Fogs - H11 V10 30W 9600lm LED kit
 
2022-chevy-silverado-led-headlight-upgrade-sm.jpg  
2022 Chevy Silverado LED Upgrade

2012-dodge-ram-1500-longhorn-led-headlight-upgrade-sm.jpg  
2014 DODGE RAM 1500 LONGHORN LED UPGRADE
 
Low beam - 9012 Q3 72W 12000lm LED kit
 
High beam - 9005 Q3 72W 12000lm LED kit + anti-flicker decoders
 
INSTALLATION NOTES:
DIY time: 30 minutes. The grille and headlights have to be removed to get to the back of the headlights. Q3 and Z3 LED series are the only ones that will fit under the dust caps without any modification to it. All bulbs are plug-n-play. High beams require 9005 canbus anti-flicker decoders to stop the lights from turning off/on every 5 seconds.
2006-nissan-xtrail-led-headlight-upgrade-sm.jpg  
2006 NISSAN XTRAIL LED HEADLIGHT UPGRADE
 
LED kit - H4 (9003, HB2) 6V DRL COMPATIBLE V10 9600lm 30W fanless and wireless LED headlight kit. DRL voltage is 6.3V on high beam. Measured LED light output is 3x that of an H4 halogen bulb (LED 1280 LUX vs Halogen 400 LUX).
 
INSTALLATION NOTES:
Super easy install. Nothing else other than the power plug and the dust boot has to be removed to get to the bulbs. DIY time about 15 minutes.
2010-acura-rdx-led-fog-light-and-signal-light-upgrade-sm.jpg  
2010 ACURA RDX LED UPGRADE
 
Low beam - factory xenon HID
High beam - 9005 V10 LED 6V DRL compatible. No flickering in DRL mode. Anti-flicker decoders are NOT needed.
Fogs - H11 V10 30W 9600lm LED kit
Signal/Marker - 1157 28W amber/white LED bulbs
 
2022-gmc-canyon-led-upgrade-sm.jpg  
2022 GMC CANYON - LED headlight upgrade
 
Low beam - H11 U9 LED Series Canbus 100W 16000lm.
High beam - 9005 U9 LED Series Canbus 100W 16000lm.
 
INSTALLATION  NOTES:
DIY installation: 15 minutes. Easy access to everything.
2015-jeep-cherokee-sport-9012-led-headlight-upgrade-sm.jpg  
2015 JEEP CHEROKEE SPORT
 
 
INSTALLATION NOTES:
To gain access to the headlights, two bolts in each wheel well must be removed and the lining moved to the side. The lining is not too rigid so it's an easy job. There are hard plastic dust caps on the back of the headlights. Turn them CCW to remove them. The 9012 LED bulb installs easily. There is ample room for the LED decoder and the bulb's 3.0cm long fan under the dust caps.
2011-ford-focus-led-headlight-upgrade-hvc.jpg  

2011 Ford Focus

Low/High beam - H13 GTS Pro 120W 24000lm canbus LED kit

Fogs - H11 V10 30W 9600lm LED kit

INSTALLATION NOTES:
The only way to install the H13 LEDs is by removing the headlights. To do so, the small front grille has to be removed. The grille is held in by 4 pop up pins at the top and 6 horizontal slots at the bottom that just slide out...well, you have to use a flathead screwdriver and spread the u-shaped slots for the grille's tabs to slide out. Really it sounds simple but it's a bit of work. Once the grille is out, you then have three 10mm bolts and two security tabs holding the headlights. Once those are taken out you will be able to remove the headlights and have an easy access to the back of them. The fogs can be replaced through the opening at the top where the headlights used to be just by simple reaching in unplugging the power connector and removing the halogen bulb. DYI - 0.5-1hr

2005-dodge-ram-srt-10-9007-g10-led-headlight-upgrade-sm.jpg  
2005 DODGE RAM SRT-10 9007 H/L LED Headlight Upgrade
 

Installation Notes:
Standard RAM install. Headlights have to come out for easy installation. DYI - 20 min. Anti-flicker decoders are not needed with the G10 LED kit.
2008-honda-fit-h4-led-headlight-upgrade-with-canbus-decoders-hid-vision-canada-sm.jpg  

2008 Honda Fit Gen.1 - H4 H/L LED Headlight Upgrade

Low/High beam - H4 V10P 6V DRL 9600lm 34W LED kit + H4 anti-flicker decoders

INSTALLATION NOTES:
All functions of the headlights were preserved following the LED install. 6V DRL, low beam, and high beam, all worked as expected.

2015-toyota-highlander-h11-u9-led-low-beam-upgrade-hid-vision-canada.jpg  
2015 TOYOTA HIGHLANDER - low beam LED upgrade
 
 
INSTALLATION NOTES:
15 min DIY install. Drivers side is easily accessible by simple reaching behind the headlight. There are NO dust caps which makes the install a breeze. The passenger side requires the removal of the windshield washer filler tube, which takes an extra 20 seconds. 
 
Anti-flicker decoders were not needed for this install.
jeep-cherokee-led-headlight-upgrade-sm.jpg  

JEEP Cherokee LED headlight Upgrade

7" Spider LED headlights with canbus anti-flicker decoders

2020-ford-ranger-led-headlight-upgrade-sm.jpg  
2020 Ford Ranger LED headlight Upgrade
 
Low beam - H11 U9 100W 16000lm LED kit was installed. Anti-flicker decoders were not needed. Low beam DRL worked as expected following the upgrade.
2014-kia-sportage-led-headlight-and-fog-light-upgrade-sm.jpg  

2014 KIA SPORTAGE LED Headlight and LED fog light upgrade

Low beam - H11B LED headlight bulbs 5.5x brighter than a halogen H11B
Fogs - 880 M4 3200lm 50W LED kit
 
INSTALLATION NOTES:
H11B are easy to get to from the engine compartment. The fogs are accessed through the wheel wells. The passenger side is hard to get to.
2015-dodge-ram-1500-led-headlight-upgrade-sm.jpg  

2015 DODGE RAM 1500 LED headlight upgrade

Low beam projector headlight LED upgrade to 9012 X9 LED kit with canbus anti-flicker decoders.

INSTALLATION NOTES:
This was a challenging one. We installed 2 sets of LEDs (U9, F5), including ones that exactly matched the 9012 halogen's power draw (F5 series), but they both started to flash and turn off randomly the next day, even with the decoders installed. Finally, we tried a set of 9012 LEDs X9 series 90W 20000lm that worked on install, and most importantly, even the next day. 2nd Gen 9012 canbus anti-flicker decoders has to be used. All parts fit inside the headlight and the LED bulbs fit easily under the dust cap without any modification.

2017-honda-fit-led-upgrade-h4-x9s-sm.jpg  

2017 HONDA FIT LED Headlight Upgrade

Low/High Beam - H4 (9003) X9S H/L canbus 110W 20000lm LED kit.

INSTALLATION NOTES:
Anti-flicker decoders were not needed. Flicker-free operation in DRL and AUTO mode. DRL voltage is: 6.6V  Easy straight forward install - unplug H4 power connectors, remove the rubber dust boot, unclip the H4 halogen bulb, install the H4 LED bulb socket ring in the headlight, re-install the rubber dust boot, insert the H4 led bulb into the socket, turn it clockwise until the power cable is at 6 o'clock and the LEDs are aligned perfectly left/right in the headlight. 

In a 6V bench test, the H4 X9S LED bulb did not produce any light until 9V was reached. However, somehow the LED bulbs worked in the car at 6.6V DRL. Going from AUTO/DRL mode to lights ON, we saw way more light in the low beam and high beam. When switched back to AUTO/DRL mode the light intensity visually dropped to a half.

2010-ford-escape-h13-gts-pro-led-headlight-upgrade-sm.jpg  

2010 FORD ESCAPE LED Headlight Upgrade

Low/High beam - H13 GTS Pro 120W 24000lm LED kit

INSTALLATION NOTES:
The H13 GTS Pro kit works perfectly in daytime running light mode and in high and low beams. Anti-flicker decoders are not needed.

2018-hyundai-santafe-low-beam-upgrade-h7-35w-asic-hid-kit-with-adapters-sm.jpg  
2018 HYUNDAI SANTAFe HID Upgrade
 
Low beam- H7 35W 6000K ASIC Canbus HID Kit with H7 bulb adapters.
 
INSTALLATION NOTES:
Headlights have to be removed to gain access to the back of them. To remove them, the bolts on top of the headlights have to be removed and the headlights popped-out (with some decent force). The bumper does not have to be removed.
2014-gmc-sierra-all-terrain-3012-n2-p-led-headlight-upgrade-sm.jpg  

2014 GMC SIERRA ALL TERRAIN LED headlight upgrade

Low/High LED Projector Headlight 9012 N2-P 19200lm 120W canbus kit

In the photo - the left bulb is halogen, and the right bulb is LED.

2012-toyota-tacoma-h4-led-headlight-upgrade-sm.jpg  
2012 TOYOTA TACOMA LED headlight upgrade.
 
Low/High Beam - H4 (9003) X9S 20000lm 110W canbus LED kit, fully adjustable LED beam.
 
INSTALLATION NOTES:
Super easy install in about 20 minutes.
 2017-honda-ridgeline-led-high-beam-and-dual-color-led-fog-light-upgrade-yellow-hid-vision-canada-sm.jpg  

2017 Honda Ridgeline - YELLOW FOGS

Low beam - factory LED
High beam - 9005 U9 100W 16000lm canbus LED
Fogs - H11 J1D dual color white/yellow LED

HIGH BEAM INSTALLATION NOTES:
The high beam is quite easy to get from the engine compartment, although disconnecting the power cable was quite a challenge as there is limited space to pull down on it.

2017-honda-ridgeline-led-high-beam-and-dual-color-led-fog-light-upgrade-white-hid-vision-canada-sm.jpg  

2017 Honda Ridgeline - WHITE FOGS

Low beam - factory LED
High beam - 9005 U9 100W 16000lm canbus LED
Fogs - H11 J1D dual color white/yellow LED

FOG LIGHT INSTALLATION NOTES:
The fogs are a beast of a job! Countless 10mm bolts, Phillips bolts, and plastic push pins have to be removed to get to the fogs from the underneath the truck. You gotta have lots of patience and time for this job. Once all the fasteners are removed you can remove the cowling, and finally see the back of the fog lamps. The power cables are color coded which helps in correctly connecting the leds.

2019-jeep-grand-cherokee-led-headlight-and-fog-light-upgrade-1-sm.jpg  

2019 JEEP GRAND CHEROKEE LED headlight and fog light upgrade.

Low beam - H11 U9 100W 16000lm LED 
Fogs - H11 U9 100W 16000lm LED kit

Installation Notes:
Both sides are extremely difficult to get to and require patience and determination to get the LEDs installed. 100% out least favorite vehicle for LED headlight bulb upgrades. DIY - 2hrs

2015-gmc-duramax-led-headlight-upgrade-sm.jpg  

2015 GMC Duramax headlight upgrade

Low/high beam - 9012 X9S 20000lm LED kit

Installation Notes:
This is a classic GMC install. Easy access on the drivers side. Air box removal required on the passenger side to gain access to the headlight. DIY 30 min.

2000-vw-golf-1.9tdi-hid-headlight-upgrade.jpg  

2000 VW GOLF 1.9TDI - low and high beam HID upgrade.

Low beam - H7 4300K 35W canbus pro HID kit
High beam - H7 6000K 42W ASIC fast start HID kit by customer’s request.

2012-ram-3500-led-headlight-upgrade-sm.jpg  

2012 RAM 3500 LED headlight upgrade.

Low beam - H11 GTS PRO 120W 24000lm low beam LED kit with H11 anti-flicker decoders.
High beam - 9005 U9 100W 16000lm high beam LED kit.

Installation Notes:
Grille and headlights have to be removed. Headlights have a separate round dust cover on low beam and high beam. Low beam has lots of space for any LED kit, high beam has limited space for up to 3cm led fan length. Everything fit neatly under the headlight dust caps including the decoders.

2020-dodge-ram-1500-bluetooth-led-grille-lights-sm.jpg  

2020 Dodge RAM 1500 LED grille lights

Smoked Lens RGB+W Bluetooth LED Grille Lights, Strobe Lights, DRL Lights, Hood Lights - 4pcs

Installation Notes:
The side wings with the screws were cut off on each light as they had no purpose. The lights were affixed inside the grille with black RTV Silicon. Power wires from the BT control unit were ran directly to the battery +/-. Power ON/OFF is controlled via the BT phone app. DIY install 1.5hrs

 

2020-ford-expedition-led-headlight-upgrade-sm.jpg  
2020 Ford Expedition LED Headlight Upgrade

Low beam - 9005 U9 100W 16000lm LED kit inside projector headlights.
High beam - H11 U9 100W 16000lm LED kit inside reflector headlights.
Fogs/Cornering lights - H11 V10 30W 9600lm fanless LED kit.

Installation Notes:
DIY install time 30 minutes. All bulbs are easily accessible through the wheel wells. Low and High beams have lots of space for any led kit. The fogs will not fit a fanned bulb.
2007-chevy-express-led-headlights-sm.jpg  

2007 CHEVY EXPRESS LED Headlight Upgrade

85W 5x7 OSRAM LED headlights with DRL, and separate high/low beam

Installation Notes:
Remove two screws from the chrome frame holding the headlight in place. The frame and the headlight slide out the front. Standard H4 connector for high/low beam. DRL connects to fuse #47 located in the engine bay fuse box.

2012-ford-f350-led-headlight-upgrade-sm-hid-vision-canada.jpg  

2012 Ford F350 LED Headlight Upgrade

Low/High beam LED kit - H13 GTS Pro 120W 24000lm canbus LED

Installation Notes:
Remove the radiator cover. Remove the bolts holding the top of the grille, then tilt the grille forward to get access to the headlights. Next remove two bolts holding the headlight in place - they are located near the sides of the radiator. Next, pop the headlights out,moving them straight out towards you. There is a small tab on the fender side that is part of the headlight.  

 2019-jeep-grand-cherokee-high-altitude-led-headlight-upgrade-sm-hid-vision-canada.jpg  

2019 JEEP Grand Cherokee High Altitude LED headlight Upgrade

Low beam - H11 H55 110W 22000lm
High beam - H11 U9 100W 16000lm

Installation Notes:
There is lots of room under the low beam dust caps. High beam has limited space.

2015-dodge-ram-1500-9012-led-headlight-upgrade-sm-hid-vision-canada.jpg  

2015 Dodge RAM 1500 LED headlight upgrade

Low/High beam - 9012 (HIR2) F5 110W 20000lm CANBUS G-XP X3 + anti-flicker decoders

Installation Notes:
Standard RAM install. Grille comes out, headlights come out. Remove the hard plastic dust cap on the back of the headlight. 9012 F5 fits perfectly under the dust cap. No modification required. Anti-flicker decoders are required. The decoders fit inside the headlights.

2015-gmc-sierra-1500-led-headlight-upgrade-sm-9012-gts-pro-hid-vision-canada.jpg  

2015 GMC Sierra 1500 LED Headlight upgrade.

LED kit - 9012 GTS PRO 120W 24000lm

Installation Notes:
9012 LED fits directly under the dust caps. Passenger side air box has to come out to get access to the headlight.

2007-jeep-compass-sport-h13-led-headlight-upgrade-with-anti-flicker-decoders.jpg  

2008 JEEP Compass Sport

LED kit - H13 (9008) F5 110W 20000lm CANBUS H/L G-XP X3 + H13 anti-flicker decoders

Installation Notes:
Super easy 10 minute install. Both headlights are easily accessible from the engine compartment. Nothing has to be removed. Simply uninstall the halogen bulb and install the new H13 LED with the H13 anti-flicker decoder, and secure the decoders to the metal frame above the headlights.

2020-kia-forte-5-gt-sm-hid-vision-canada.jpg  

2020 KIA Forte 5 GT - LED fog light upgrade

LED kit - 9006 (HB4) F3S PRO 24000LM 120W Canbus

2004-chevy-monte-carlo-ss-led-headlight-upgrade-sm-hid-vision-canada.jpg  
2004 CHEVY MONTE CARLO SS


Installation Notes:
Super easy install. Two slide brackets hold each headlight in place. Once the headlights come out disconnect the power cable. Install LEDs. Make sure to align them properly with the power cable at 6 o'clock.
2009-ford-f150-h13-gts-pro-upgrade-sm.jpg  

2009 FORD F150 LED headlight upgrade

LED kit - H13 (9008) H/L 120W 24000lm canbus

Installation Notes:
Super easy install. Remove 3pcs 10mm headlight bolts then slide the headlight out. Anti-flicker decoders are not needed. DIY time - 15 minutes.

2009-ford-f150-led-fogs-sm.jpg  

2009 FORD F150 LED fog light upgrade

LED kit - H10 VX 16000lm canbus

Installation Notes:
Super 2 min easy install. Just reach in under the bumper, remove the old bulb, then install the led.

2011-ford-flex-led-headlight-and-fog-light-upgrade-hid-vision-canada-sm.jpg  

2011 Ford FLEX LED headlight and fog light upgrade

Headlights: D3S LED

Fogs - H11 V10P 9600lm

Installation Notes:
Fogs - reach under the front bumper and install new leds. 
Headlight bulbs - turn the D3S HID bulb counterclockwise then pull it out of the headlight with the power cable attached. Disconnect the power cable and attach it to the D3S LED. The space is tight to re-insert the LED bulb with the cable attached. To get it in the headlight, rotate the bulb to 3 o'clock and then push it into the headlight. Don't forget to rotate it clockwise so the power cable is at 6 o'clock and the bulb is locked in the headlight.

2019-chevrolet-traverse-d3s-led-and-psx24w-led-fogs.jpg  
2019 Chevrolet Traverse - D3S LED headlight bulb upgrade, and PSX24W LED Fog light upgrade.
 
Headlights: D3S LED
 
Fogs: PSX24W LED - the single left tab on the bulb collar had to be removed. 
 
Installation Notes:
Installing the headlight bulbs is straight forward. The fog lights can be installed through the wheel wells.
2021-jeep-wrangler-rock-lights-1.jpg  
2021 Jeep Wrangler LED Rock Light
 
Rock lights - 4pc RGB, Bluetooth controlled via iPhone/Android app.
 
Installation Notes: 4hrs to install. Step bars were removed for an easier  installation. The control box was mounted on top of the fuse box and power to it was taken from the cigarette lighter 20Amp fuse.
2004-pontiac-sunfire-h11-q3-sm.jpg  

2004 Pontiac Sunfire LED low beam upgrade.

Only the H11 Q3 series LED fit because of the limited space at the back of the headlight.

Installation Notes: the headlights have to be removed - only 2 bolts at the top of the headlight are holding them in.

1991-chevy-g20-h4-led-headlight-upgrade.jpg  
1991 Chevy G20 H4 LED headlight upgrade
 
Headlight - H4 V10 H/L LED kit with 6V DRL compatibility
 
Installation Notes: headlights have to be removed to get access to the bulbs. Both H4 connectors were melted and had to be replaced.
1991-chevy-g20-33-inch-amber-white-led-bar.jpg  

1991 Chevy G20 H4 33” single row dual color white/amber LED bar with a wireless relay and a remote control.

LED bar - 33" dual color white/amber

LED relay - wireless with a remote control to switch between amber and white colors, and to turn on many strobe effects. No need to run power and control wires through the firewall. The relay connects directly to the battery and the LED bar. 

2003-toyota-tacoma-h4-idl-led-upgrade-sm.jpg  
2003 Toyota Tacoma LED Headlight Upgrade
 
Headlights - H4 high/low IDL 130W 26000lm LED kit,
H4 2nd Gen Anti-flicker decoders

Rear Signal Lights - 1156 26W Fan Cooled Canbus LED bulbs - AMBER color - no hyperflash
 
Installation Notes:
Super easy install. Headlight bulbs are accessible through the engine bay without having to remove anything. H4 anti-flicker decoders were needed.
night-driving-highway-photo.jpg  

2003 Toyota Tacoma LED Headlight Upgrade

Highway photo from the cab of the 2003 Toyota Tacoma featured on the left.

2018-gms-sierra-2500hd-d5s-g2-led-hid-vision-canada-sm.jpg  
2018 GMC Sierra 2500HD - D5 LED upgrade from D5S HID.
 
Installation Notes:
Easy access to the driver's side bulb. Passenger side need to have the air box removed. Little trick to removing the bulbs from the housing: turn the bulbs 90 degrees counterclockwise for easy removal of the HID bulbs with power wires attached. There is a two sided locking tab at the front of the bulb which needs to be turned counterclockwise before the HID bulb can be removed. Reverse the steps on installation of the LEDs.
2021-ford-sport-eco.jpg  

2021 Ford Eco Sport

Low beam projector headlight - H11 F3S Pro 26000lm 120W

Installation Notes:
Both sides can be accessed from the engine compartment. LED bulbs fit under the dust caps and in the off-center aligned headlight holes.

2005-dodge-ram-3500-led-headlight-upgrade-9007-x20-110w-24000lm-hvc-sm.jpg  
2005 DODGE RAM 3500
 
 
Installation Notes:
Standard RAM install. Headlights have to come out. Retaining rings had to be cut to 180 degrees and 50% width to allow for the bulb's power cable to fit inside them before being able to lock the bulbs in the bulb rings installed inside the headlights.
 
RESISTORS - Not needed
ANTI-FLICKER DECODERS - Not needed
2015-gmc-sierra-denali-9012-led-headlight-upgrade-1-sm-hid-vision-canada.jpg  
2015 GMC Sierra Denali LED headlight Upgrade

Projector Headlight - 9012 H/L 110W 24000lm CANBUS LED kit - direct plug-n-play, no modifications required, all parts fit inside the headlight, anti-flicker decoders are not needed for the install.
 
Installation Notes:
The drivers side bulbs can be installed from the engine compartment without having to remove anything. The passenger side installation requires the removal of the air box. DIY: 0.5-1hr  
 
The bulbs did require alignment to sit vertically in the headlights.
2012-subaru-outlander-led-headlight-upgrade-hid-vision-canada.jpg  
2012 SUBARU OUTBACK - H7 LED LOW BEAM UPGRADE
 
 
 
INSTALLATION NOTES:
This could have been an easy install but Subaru did not make it easy to get to the back of the headlights. So, you gotta go in through the wheel wells, and then fight your way through a bunch of hoses and cables on the driver's side before you can finally reach the back of the headlight housing to undo the cover. Luckily the H7 halogen bulb is held in the headlight with just the standard wire clip not some proprietary H7 adapter. Once the bulb was removed, the LED bulb collar had to be installed in the headlight, and then the LED bulb installed in it. Not too bad given the lack of space and cable length on the headlight power connector. The passenger side was a bit easier to do, but both sides were not easy for re-installing the dust caps.
2011-lincoln-mkz-low-beam-led-upgrade-sm.jpg  
2011 Lincoln MKZ
 
 
Installation Notes:
We decided to skip the high beam upgrade because the opening in the headlight is so small that a hand does not fit in. The driver's side could be done with needle nose pliers, but the passenger side required that the whole headlight is removed for the upgrade. Simply not worth the time given the light output of the low beams.
 
Low beams can be installed through the wheel wells, although the driver's side can be done through the engine compartment with some patience.
 
Installation Difficulty: 4/5 HORRIBLE
2001-gmc-sierra-led-headlight-upgrade-sm.jpg  

2001 GMC SIERRA

Low - 9006 Q3 LED 72W 12000lm canbus
High - 9005 Q3 LED 72W 12000lm canbus

Installation notes:
Super easy install. Remove the headlights and install LED bulbs. The Q3 bulbs are small and fit perfectly in the limited space at the back of the headlights.

2014-dodge-ram-1500-9012u9-9005-q3-hid-vision-canada-sm.jpg  
2014 Dodge RAM 1500 w/projector low beam LED Upgrade
 
LOW BEAM - 9012 U9 100W 16000lm direct fit under the dust cap. Anti-flicker decoders are NOT needed.

HIGH BEAM - 9005 Q3 72W 12000lm direct fit under the dust cap

FOGS - 9006 ATK 60W 6000lm Tri-Color WHITE/YELLOW/BLUE
2016-toyota-4runner-high-beam-9005-x9s-led-installed-hid-vision-canada-sm.jpg  
2016 Toyota 4Runner - High and Low beam LED upgrade
 
LED bulbs fit directly under the dust cap without any modification. You have about 3.5cm of free space to fit an LED bulb's fan into.
 
LED bulb easily fit in the space provided. There are no dust caps to deal with. 9005 anti-flicker decoders were needed to take away the slight light pulsation in DRL mode. DRL voltage is 6V. I don't know why, but the 9005 X9S worked perfectly in DRL (6V) even though their minimum voltage is 8V.
 
Installation notes:
Super easy install through the engine compartment. No parts had to be moved or removed to get to both the high and the low beams. Both kits are plug-n-play. Everything worked as usual in DRL, low beam, and high beam, with the headlight switch in AUTO or ON. DIY - 20 min.
2015-2017-ford-expedition-led-headlight-upgrade-hid-vision-canada.jpg  
2015 Ford Expedition LED headlight and Fog Light Upgrade - applies to 2015-2017 Expeditions with reflector headlights
 
Installation Notes:
The headlights have to be removed to gain access to the back of them. To do so, remove two 10mm bolts on top of each headlight, and remove the headlight from the truck. The low beams have ample space for any led kit and any led bulb size, so the OEM rubber dust cap covers can be reinstalled easily. The high beams are offset, and only two led series fit the space - Q3 and U9. It is not possible to fit the OEM dust cap back on once the LED bulbs are installed because they are tight against the side of the headlight opening. Installing after-market rubber dust caps solves the problem. Use Z2 (K80) 80-83mm rubber dust caps to fit over the high beams. Don't forget to align the led bulbs - the power cable on the LED bulb's fan must point down to 6 o'clock. DIY - 30 minutes
2013-hyundai-santafe-h11-low-beam-f3s-pro-led-hid-vision-canada-sm.jpg  
2013 Hyundai SantaFe
 
LOW BEAM - H11 F3S Pro 120W 26000lm LED kit
 
Installation Notes:
Easy access to both headlights from the engine compartment. LED bulb rings had to be rotated 180 degrees in order to be able to align the LED bulbs in the headlight properly.
2019-ram-promaster-led-headlight-upgrade-hid-vision-canada.jpg  

2019 RAM PROMASTER

LOW BEAM - H7 E4X LED kit

HIGH BEAM - H7 K1 LED KIT

Installation Notes:
Upper and lower trim around the headlight has to come off first. Then there are three 10mm bolts that have to be removed to remove the headlights from the vehicle. Both, low beams and high beams have a proprietary H7 adapters, so the only LED kits that fit are the 1:1 fanless LED bulbs. To install the low beam H7 bulb, you MUST put it in the headlight first, and then install the connector. The high beam is the opposite - you must install the bulb in the adapter first and then put it in the headlight. Installation time: 30 minutes.
2013-ford-edge-9012-led-headlight-upgrade-hid-vision-canada.jpg  
2013 FORD EDGE - LED headlight Upgrade
 
Low/High - 9012 X9S 110W 20000lm canbus LED kit fitted into a projector headlight.
 
Installation Notes:
Easy access to both passenger and driver headlights from the engine compartment. 9012 large tab is at the bottom at 6 o'clock, so the LED bulbs needed to be aligned. There is lots of room under the dust caps for ANY 9012 LED kit. If you need extra depth, or you're missing a dust cap, you can use the K95 (95mm) rubber dust caps for direct fitment.
2021-husqvarna-501s-hid-vision-canada-h4-x10-led-upgrade-sm.jpg  

2021 Husqvarna 501S LED headlight upgrade

Low/High - H4 X10 LED kit

Installation Notes: Quite a bit of modification had to be done to the socket in which the bulb sits, and to the hard plastic bulb cover, to make the bulb fit. A larger rubber dust cap (K85) was then used to cover the back of the headlight to protect it from dust and mud.

2014-hyundai-santafe-led-headlight-and-fog-light-upgrade-white-fogs-hid-vision-canada-sm.jpg   2014-hyundai-santafe-led-headlight-and-fog-light-upgrade-yellow-fogs-hid-vision-canada-sm.jpg  

2014 HYUNDAI SANTAFE LED LOW BEAM, HIGH BEAM, FOG LIGHT, INTERIOR, AND BACKUP UPGRADE - continued from the left side

INSTALLATION NOTES:
The high beam H7 bulbs are held in the headlight with a wire clip, which is great news for LED upgrades. There is also enough room under the dust cap to fit bulky fanned LED bulbs, up to 3.8cm. The bad news is, there is no room inside the headlight for external LED drivers, so only bulbs with built-in LED drivers can be installed, with the exception of super slim external LED drivers. To access the high beam compartment, simply reach in behind the headlight and remove the dust cap.

The fogs use H11 bulbs, and can be easily accessed through the wheel wells.

Replacing the dome, rear ceiling, cargo, and reverse light was a bit more challenging. The front dome light - remove two screws inside the eye glasses compartment, then starting on the side nearest the windshield, pry down toward the inside of the vehicle. There are two large tabs on the upper side of the dome console which will prevent you from removing the console on that side first. The next step is to remove two philips screws on the black part of the console which holds the bulbs. Once those are removed, there are 6 plastic tabs which have to be gently pried before you can pop the holder open. The rear roof side lights are difficult to remove. You must start at the bottom of each light and with a super thin screwdriver pry open the bottom side of the lens. Then on a 45 degree angle, wiggle the upper two tabs loose to remove the lens. This took considerable amount of time, and caused slight nicks in the grey plastic surrounding the lights. The cargo light is very easy to remove, as are the reverse lights which hide under the cover of the trunk lid.

2013-chevy-traverse-led-headlight-upgrade-low-beam-h11-q3-sm.jpg  
2013 CHEVY TRAVERSE - LED headlight upgrade
 
 
INSTALLATION NOTES:
Super easy 15 minute install. Remover two T20 screws located in the wheel well. Reach the back of the headlight by moving the plastic wheel well lining aside. Remove the plastic headlight cover. Remove the bulb and install the new LED.