Yellow, White, Yellow - this is how fast you can change from one color to another with these S1D LED kits. When you first turn your fog lamps on they will be white. To change colors, simply turn them off and back on and you will have yellow fog lamps. It can't be any simpler. Please note that these are NOT be suitable for vehicle which use the fogs as cornering lights (fog lights that come ON when signalling) because the cornering lights cause the bulbs to de-synchronize. Also, vehicles where fogs get turned off when high beams are turned on need to know that these bulbs will change color after the high beams are turned off due to the fogs seeing this action as a sequence of ON-OFF-ON which is telling them to change color. Both cornering lights and fogs off in high beam are usually something that can be disabled.
Kit includes: 2 dual color LED bulbs and 2 LED drivers.
SPECIFICATIONS:
- 360 degree light source - LED chips on both sides of the bulb light up when lights are ON
- Cooling: fanless design with rib cooling
- Brightness: 4500lm per bulb, 9000lm per kit
- LED: 12pcs CSP-Y19, 6pcs white, 6pcs amber per bulb
- Power: 20W per bulb, 40W per kit
- 6V DRL Compatible: NO
- Minimum operating voltage: 8.0V
- Voltage: DC 9-32V
- Current: 1.79Amp@12V (halogen bulb uses about 4.9Amps)
- Color: 6500K (white), 3150K (halogen color)
- Lifespan: 30,000hrs
- Waterproof rating: IP65
- Canbus: NO
- Adjustable beam: NO
- Working Temperature: -40C to +80C
Successfully installed in:
- 2019 Mitsubishi RVR - fogs
- 2010 Audi Q5
DIMENSIONS:
Total bulb length: 7.8cm
Cooling diameter: 3.5cm x 4.3cm
Space needed behind the headlight: 3.3cm
Bulb diameter at the top: 1.3cm
Bulb thickness at the top: 0.4cm
LED driver size: 5.2cm L x 3.2cm W x 1.1cm H (2"L x 1-1/4"W x 1/4"H)
USAGE:
To switch between colors, you should allow at least 2-3 seconds between ON/OFF/ON cycles. Starting color is white. OFF/ON sequence will change the color to yellow.
TECH NOTE:
If lights ever become de-syncronized, meaning one will be yellow and the other white, simply keep pressing the ON/OFF light switch fast (0.5 second intervals), switching the lights to ON and then OFF, until the lights become syncronized again. They should become synchronized within 3-4 ON/OFF cycles.
