D5S HID kit 42W ASIC Fast Start Canbus Ballasts + D5S HID bulbs / 60% brighter than 25W OEM HID bulbs

Don't want to spend $300 on replacing OEM ballasts? This HID kit replaces the OEM 25W D5S HID bulbs and OEM ballasts. OEM headlight power connector plugs directly into the power connector for the ASIC ballasts which then supplies power to the HID bulbs. The kit comes with two D5S 35W HID bulbs and 2 ASIC canbus ballasts. ASIC digital ballasts utilize a German ASIC processing chip to monitor the HID bulbs' power requirements in real-time, and increasing their life-span. 

ASIC BALLAST FEATURES:

• no flickering
• no "bulb out" dash light error warnings
• stops lights from shutting off after a few minutes of being on 

D5S HID KIT INCLUDES:

• 2pcs D5S 35W HID bulbs
• 2pcs ASIC 42W canbus ballasts

INSTALLATION:

Remove the factory D5S HID bulbs, install the new D5S HID bulbs, connect the black rectangular connector on the new HID bulbs to the factory headlight power connector, connect the oval black connector to the ASIC HID ballast, connect the blue bulb connectors to the ASIC ballast. DO NOT drill any holes in the dust cap yet! Try the setup first to determine if it will work in your vehicle. With all the parts connected, turn the lights ON. If both lights come ON then move to the next step which is starting the vehicle and the turning the lights ON. With the vehicle running, and lights ON, check if the lights are ON, if there is any flickering, run through the ON, OFF, AUTO modes to see what happens in the various headlight settings. If all works as it supposed to then drill the 1" holes in the dust caps and complete the physical installation of the HID kit.