With our roads getting more and more congested and drivers pre-occupied with music selection, cell phones, navigation, satellite radios, it's easy to see why rear-end crashes are not only one of the most frequently occurring types of crashes, but also are responsible for a large number of injuries and fatalities every year. LED brake lamp strobe controller aid avoiding rear-end collisions by making the center high mounted brake light to automatically emit a visual alerting signal of 3 very fast and 3 slower light flashes before entering into a steady brake light ON. This sequence has been selected to gain maximum attention of the driver following.This is the perfect visual warning for motorcycle, cars, and trucks on the roads today.
IMPORTANT: This unit works ONLY with LED brake lights and LED light bulbs. It has a max load of 15W (example: 5x3W LED bulbs). If you have halogen bulbs you will need the HALOGEN/LED light controller unit. Using this LED light controller with halogen bulbs will burn the unit out after the first brake application.
HOW DOES IT WORK?
When you apply brakes the rear brake light strobes fast 3x, then it blinks slower 3x, and then it comes on steady until you release the brake pedal.
Power: 10-15W (USE WITH LED BULBS ONLY!)
Current: 0.8A - 1.2A
Size: 48mm x 22mm x 13mm
Connecting cable length: 150mm
Self adhesive tape is included
The unit connects to a rear window brake light. There are only 2 wires to connect - positive (+) and ground (-). Easy Easy!
- Car or truck high mount 3rd brake lights - must be LED or have LED bulbs installed
- Motorbike brake lights - must be LED or have LED bulbs installed