H4 H/L C6 Kit includes: 2pcs all-in-one LED bulbs. They are intended for use in headlights with H4 bulbs. They offer high and low beam functionality just the same as your H4 halogen bulbs.
C6 LED kits are an inexpensive alternative to halogen bulb. They are not the brightest LED kits on the market, but they still produce 2.5x more light than halogen bulbs. Each bulb has a cooling fan and an LED driver built-into the bulb for easy installation. They use COB (chip-on-board) technology to reach maximum light and minimize glare. If you're worried about blinding oncoming traffic with too much light then these are for you. They will improve your night driving by offering you more light and at the same time not blind oncoming traffic.
What is COB LED?
Chips On Board (COB) LED is the latest technology by which multiple LED chips are packaged together into one lighting module. When the module lights up, it looks like a single lighting panel. COB LED can increase lighting area by 10 fold, while minimizing glare.
FEATURES:
- Low beam/High beam support
- Suitable for headlights
- LED chips on both sides of the bulb are ON providing 360 degree light source
- Power: 36W per bulb
- Output: 3800lm per bulb, 7600lm per kit
- LED CHIPS: COB
- High Power Fan
- Voltage: DC 8-48V
- 6V DRL compatible
- Lifespan: 30,000hrs
- Rating: IP67
- Color: 6500K low and high beam are white
- Optional: We have one H4 C6 LED kit with YELLOW low beam and WHITE high beam, all on the same bulb. If you want it, please add it to the notes when ordering.
DIMENSIONS:
Total bulb length: 9.7cm
Fan height: 5.0cm
Fan diameter: 3.4cm
Space needed behind the headlight: 5.1cm
INSTALLATION NOTES:
To install these H4 LED bulbs, you will have to install the metal H4 bulb adapter in the headlight first and secure it with the spring wire. Then you install the rubber boot, and then you slide in the H4 bulb through the boot. Please make sure you press on the sides of the bulb's fan and not the middle of it as the force will collapse the fan's protective metal cover right onto the fan. There is a clear rubber o-ring which must be in the first groove on the bulb (one closest to the front of the bulb). It will come this way in the package but it is easily moved if you have to pull the bulb out and re-install it. The small o-ring compresses inside the H4 adapter tightly securing the bulb in place. The last step is to connect the H4 light connector to the LED bulb's H4 connector.